[unknown] actually it is my fault. I forced ChatGPT to calculate it with numbers for the sake of accuracy.
The True problem with ChatGPT is that it was made by humans who still follow the flawed Pi, so the answers provided by the GPT will not be 100% accurate especially if we calculate numbers with symbols. However it has proven to accurate up to 15dp.
That's why I looked for higher accuracy with Wolfram.
I want to express my appreciation to the FIGU Radicals for participating in my experiment which was a success. As predicted both Jude and Arthur, completely ignored the recent information I posted about Pi in Contact Reports 712 and 722 where both Ptaah and Billy make it perfectly clear the true and correct Pi is unknown. This was the FIGU Radicals predicted behavior, who ignored Billy Meier's information in CR 712 & CR 722 the true and correct Pi is unknown, because it does not align with the FIGU Radicals biased belief Pi = 3.1446.
As there is no credible proof Pi = 3.1446, this experiment highlights the FIGU Radicals blinding devotion in a false belief Pi = 3.1446 similar to a faith based cult or religion. The experiment demonstrates the FIGU Radicals uncanny ability to block and ignore trusted and reliable information from Billy Meier, unless it supports their Pi = 3.1446 bias.
The experiment highlights the FIGU Radicals are not so much interested in learning from Billy Meier and what Billy and the Plejaren are willing to teach us, but rather, that the FIGU Radicals ignore Billy Meier's teachings when its suites their personal agenda, and therefore urge caution regarding anything Arthur, Jude or any of the other FIGU Radicals have to say with respect to understanding the TRUTH. I know personally, I wouldn't believe anything they say unless it can be verified authentic, accurate and correct as they have repeatedly presented faked fraudulent proofs Pi = 3.1446, using every trick you can imagine, and quite frankly, cannot be trusted.
[unknown] that is the exact method and the easiest to do. I thought I was the only one to find it. I'm glad that we are on the same vibe.
[unknown] the steps for the squaring of the circle or that of the visualization?
[unknown] I took the gap visualization from another video on YouTube relating to the same purpose (proving pi). I noticed that the equation was too complicated for me to reproduce so since I already have an account in desmos, I looked for the info directly from there which allowed me to save the visualization to my account (so already, credit is due to the original poster of the visualization).
From the saved vizualization, I replaced all Pi elements with 3.14460551103... But I kept both for comparison purposes.
[unknown] it is the best way. To learn through our mistakes and avoid making the same mistakes again.
A simple comparison using Desmos
Hush : More information saying that Traditional Π = Pi = 3.141592653589793 is false:
The currently accepted value of Pi = (10 ^ 12)/(16255123/10213395)/(2)/(10 ^ 11) = 3.141592653589793 and is called regular Pi by some mathematicians.
Regular Pi = (10 ^ 12)/(16255123/10213395)/(2)/(10 ^ 11) = 3.141592653589793 is wrong and does NOT belong to a circle but belongs to a polygon with many edges instead and you MUST always remember that a circle does NOT have any edges so that further proves that Traditional Π = Pi = (10 ^ 12)/(16255123/10213395)/(2)/(10 ^ 11) = 3.141592653589793 is false.
Traditional Π = Pi = (51066975/16255123) = 3.141592653589793 is false.
Traditional Π = Pi = ((10 ^ 42)/(30685681/9640191)) = 3.141592653589793 is false.
Traditional Π = (4/√(48908982/30169519)) = 3.141592653589793 is false.
Common sense should tell you that a polygon and a circle are NOT the same thing but you are acting as if a circle and a polygon are the same thing when a circle is different from a polygon. A circle is defined by my dictionary as a plane figure with points that are equally distant from a central point.
My dictionary says that a polygon is a plane figure with a minimum of 3 edges.
A polygon can have many edges.
It is impossible for a polygon to become a circle and that means that Pi MUST be larger than 3.141. 3.141 belongs to a polygon with more than a trillion edges but a circle does NOT have any edges. A polygon is identified and known by the number of edges that the polygon has got for example a Decagon is a polygon with 10 edges.
It is impossible for a polygon with an infinite amount of edges to exist because a polygon is identified and known by a limited amount of edges.
I repeat a circle does NOT have any edges.
There will forever be a gap between the edge of the polygon and the curvature of the circle that contains the polygon it does NOT matter if the polygon has 10 ^ 98 edges because the gap between the edge of the polygon and the curvature of the circle that contains the polygon will forever remain.
There can only be 1 Pi and that Pi MUST full-fill the following criteria:
That Pi MUST fit the definition of Pi from the dictionary the ratio of a circle's circumference divided by a circle's diameter.
That value of Pi Must have a physical counterpart. So that means the real value of Pi cannot be transcendental because transcendental numbers do NOT exist in the real world period. Transcendental numbers are only found on calculators.
There must be more than 1 geometric proof for the true value of Pi including the squaring of the circle and that involves both the creation of a circle that has a circumference that is the same measure as the perimeter of a square with just the aid of compass and straight edge alone and also the creation of a circle and a square with the same surface area with just the aid of compass and straight edge alone.
Only Golden Pi = 4/√φ = 3.144605511029693144 can be used to square a circle with just compass and straight edge alone.
To calculate Pi accurately get a piece of foam board that is larger than A0 such as 2A0 and create upon the surface of the foam board that is larger than A0 such as 2A0 a circle with 1-meter diameter by using a beam compass with a radius of 50 centimeters.
After the circle with a 1-meter diameter has been created upon the flat surface of the piece of foam board that is larger than A0 such as 2A0 use a Rotary circle cutter with a metal blade and a radius of also 50 centimeters to cut around the contours of the circumference of the circle with a 1-meter diameter that was created upon the flat surface of the foam board that is larger than A0 such as 2A0.
The length of the tape measure should be a minimum of 3200 millimeters. Wrap the length of the tape measure around the contours of the circumference of the circle with a 1-meter diameter that was created upon the piece of foam board that is larger than A0 such as 2A0. Make sure that the measurements are facing towards your eyes by measuring inwards around the circumference of the circle. The measurement should go all around the circumference of the circle finishing back at the starting position.
The diameter of the circle MUST be equal to a minimum of 1-meter = 1000 millimeters or 100 centimeters. Do NOT use a circle with a diameter that is smaller than 1-meter.
If the diameter of the circle is reduced to 1 then the circumference of the circle is Pi.
Count the amount of times the diameter of the circle fits around the circumference of the circle and then divide the measure for the circumference of the circle by the diameter of the circle to discover the true value of Pi = 3.1446.
If the diameter of a circle is 1-meter = 1000 millimeters then the circumference of the circle has a measure of 3144.6 millimeters.
3144.6 divided by 1000 = 3.1446.
4 divided by 3.1446 = the ratio 1.272021878776315. The ratio 1.272021878776315 is an approximation of the square root of the Golden ratio = √φ = 1.272019649514069 because if the ratio 1.272021878776315 is squared the result is the ratio 1.618039660085626.
The ratio 1.618039660085626 is an approximation of the Golden ratio = (√(5) plus 1)/2 = (φ) = 1.618033988749895.
The ratio 1.618039660085626 squared = the ratio 2.618052341610009. The Golden ratio = (φ) = 1.618033988749895 squared = (√(5) plus 3)/2 = 2.618033988749895.
Proof that the Kepler right triangle is the key to the true value of Pi can also be demonstrated if the length of the measuring tape is a minimum of 4 meters = 4000 millimeters, because if the circumference of the 1-meter diameter circle = 3144.6 millimeters is marked and placed on a horizontal straight line while the 1-meter diameter of the circle = 1000 millimeters is multiplied 4 equal times on a vertical straight line the result is the circumference of the 1-meter diameter circle = 3144.6 millimeters is the shortest edge length of a Kepler right triangle while the multiplication of the 1-meter diameter of the circle = 1000 millimeters = 4000 millimeters is the second longest edge length of a Kepler right triangle.
The multiplication of the 1-meter diameter of the circle = 1000 millimeters by 4 equal parts is 4000 millimeters. 4000 divided by 3144.6 = the ratio 1.2720218787763.
The ratio 1.2720218787763 is an approximation of the square root of the golden ratio of √φ = 1.272019649514069, because the ratio 1.2720218787763 squared meaning that the ratio 1.2720218787763 times the ratio 1.2720218787763 = the ratio 1.6180396600856.
Apply the Pythagorean theorem to the 2 right angles that are created from the results of the diameter of the circle being multiplied 4 equal times upon a vertical straight line while the circumference of the circle is placed upon a horizontal straight line, to get the hypotenuse of a Kepler right triangle.
We can find the correct decimal expansion for Pi as 4/√φ = 3.144605511029693144 and that is to 18 decimal places. We can have as many decimal places for Pi that are larger than 18 as long as we remember that the exact value for Pi = 4/√φ = 3.144605511029693144.
Pi is also defined as the ratio of the area of a circle divided by the area of the square that is located on the radius of the circle.
If a circle is created with a diameter that is the same measure as the longer edge length of a Square root of the golden ratio √φ = 1.272019649514069 rectangle then one-quarter of the circle’s circumference is the same measure as the shorter edge length of a Square root of the golden ratio √φ = 1.272019649514069 rectangle, plus both the surface area of the circle and the surface area of the Square root of the golden ratio √φ = 1.272019649514069 rectangle have the same surface area.
A Square root of the golden ratio √φ = 1.272019649514069 rectangle can be divided into 8 Kepler right triangles and if the shortest edge length of a Kepler right triangle is reduced to 1 then the hypotenuse is equal to the Golden ratio of cosine (36 degrees) multiplied by 2 = (φ) = (√(5) plus 1)/2 = 1.618033988749895, while the second longest edge length of the Kepler right triangle is equal to the Square root of the golden ratio √φ = 1.272019649514069, according to the Pythagorean theorem.
A Square root of the golden ratio √φ = 1.272019649514069 rectangle that has been divided into 8 Kepler right triangles has a surface area equal to 4 times √φ = 5.088078598056276. A circle with a diameter that is equal to the longer edge length of a Square root of the golden ratio √φ = 1.272019649514069 rectangle that has been divided into 8 Kepler right triangles also has a surface area equal to 4 times √φ = 5.088078598056276.
The longer edge length of the Square root of the golden ratio √φ = 1.272019649514069 rectangle that has been divided into 8 Kepler right triangles has a surface area equal to 4 times √φ = 5.088078598056276 is also equal to 2 times √φ = 2.544039299028138.
The shorter edge length of the Square root of the golden ratio √φ = 1.272019649514069 rectangle that has been divided into 8 Kepler right triangles has a surface area equal to 4 times √φ = 5.088078598056276 is also equal to 2.
A circle with a diameter that is equal to the longer edge length of a Square root of the golden ratio √φ = 1.272019649514069 rectangle that has been divided into 8 Kepler right triangles also has a radius that is equal to the Square root of the golden ratio √φ = 1.272019649514069. √φ times √φ = the Golden ratio of cosine (36 degrees) multiplied by 2 = (φ) = (√(5) plus 1)/2 = 1.618033988749895.
Circumference of the circle = 8.
1-quarter of the circle’s circumference = 2.
Diameter of the circle = 2 times √φ = 2.544039299028138.
Radius of the circle = the Square root of the golden ratio √φ = 1.272019649514069.
The surface area of the circle divided the surface area of the square that is located on the radius of the circle = 4/√φ = 3.144605511029693144, because 4/√φ times √φ times √φ = 4 times √φ/((φ)) = 4/√φ = 3.144605511029693144.
Surface area of the circle = 4/√φ times √φ times √φ = 4 times √φ = 5.088078598056276.
Radius of the circle = the Square root of the golden ratio √φ = 1.272019649514069.
Radius of the circle squared = √φ times √φ = the Golden ratio of cosine (36 degrees) multiplied by 2 = (φ) = (√(5) plus 1)/2 = 1.618033988749895.
Pi is also defined as the surface area of the circle divided the surface area of the square that is located on the radius of the circle.
Any circle can be squared by using just compass and straight edge alone when using the real value of Pi = 4/√φ = 3.144605511029693144. After you have measured a circle with a 1 meter diameter to find the exact value of Pi for yourself the next stage is to square the circle to further prove that 4/√φ = 3.144605511029693144 is the real and true value for Pi.
If you have a given circle and you want to create a square with a perimeter that has the same measure as the curvature of the circle then just use your calculator and divide the diameter of the circle by the square root of the Golden ratio = √φ = 1.272019649514069 and you will automatically have the width of a square that has a perimeter with the same exact measure as the curvature of the circle.
Multiply Pi = 4/√φ = 3.144605511029693144 times the diameter of the circle to confirm that the circumference of the circle is the same exact measure as the perimeter of the square.
To get the second quadrature of the circle just use the square root of the square root of the Golden ratio = √√φ = 1.127838485561682 by dividing the diameter of given circle to get the width of a square with the same surface area as the given circle.
Please remember that the ratio √√φ = 1.127838485561682 is the square root of the ratio √φ = 1.272019649514069 and the ratio √φ = 1.272019649514069 is the square root of the Golden ratio of cosine (36 degrees) multiplied by 2 = (φ) = (√(5) plus 1)/2 = 1.618033988749895.
The real value of pi is NOT transcendental because the real value of Pi = 4/√φ = 3.144605511029693144 is the only value of pi that can fit the following polynomial equation:
4th dimensional equation/polynomial for Golden Pi =
4/√φ = 3.144605511029693144
Minimal polynomial: x4 + 16x2 – 256 = 0.
https://www.tiger-algebra.com/drill/x~4-16x~2-256=0/
The real value of Pi = 4/√φ = 3.144605511029693144: Please copy and paste the following link into your web browser if you cannot click onto the following link:
https://www.wolframalpha.com/input/?i=4+divided+by+the+square+root+of+the+golden+ratio
Please click on the red dots in the following link to confirm that the real value of Pi = 4/√φ = 3.1446 is not transcendental.
The real value of pi = 4/√φ = 3.144605511029693144.
Minimal polynomial: x4 + 16x2 – 256 = 0
https://www.wolframalpha.com/input/?i=x4+%2b+16x2+%e2%80%93+256+%3d+0
The True Value of Pi revealed = 4/√φ = 3.144605511029693144:
https://www.youtube.com/watch?v=AHAOn7UfXt8
The Great Pi conspiracy part 1:
https://www.veteranstodayarchives.com/2015/02/05/pi/
The Great Pi conspiracy part 2:
https://www.veteranstodayarchives.com/2015/10/06/pi2/
Physical measurement for the real value of Pi
Pi Tape Measurement Foam Board Circle 1:
https://www.youtube.com/watch?v=fATlIzht7VI
Physical measurement for the real value of Pi
Pi Tape Measurement Foam Board Circle 2:
https://www.youtube.com/watch?v=KFGww0z6HRw&pbjreload=101
Physical measurement for the real value of Pi
Pi Tape Measurement Foam Board Circle 3:
https://www.youtube.com/watch?v=KTJsCzHLsEo
Physical measurement for the real value of Pi
Measuring the circumference of a wooden cut circle with a 1-meter diameter part 1:
https://www.youtube.com/watch?v=iVNrhqLN110
Physical measurement for the real value of Pi
Measuring the circumference of a wooden cut circle with a 1-meter diameter part 2:
https://www.youtube.com/watch?v=Ck_pe81qZ9Q
Physical measurement for the real value of Pi
Measuring the circumference of a wooden cut circle with a 1-meter diameter part 3:
https://www.youtube.com/watch?v=DSAK6XcdVuI
Pi Math Proof:
http://measuringpisquaringphi.com/pi-math-proof/
Proof 7 Part 2 Pi Math Proof:
https://www.youtube.com/watch?v=ohFXjnPOOnw&t=4s
Kepler right triangle math proof for Pi;
https://www.youtube.com/watch?v=nvja8rGCbzY&t=123s
Fixing and Correcting the problems caused by using Traditional Π = Pi:
https://www.youtube.com/watch?v=X1ZAtn6g-Vg
Geo Proof 1 Brand:
https://www.youtube.com/watch?v=FBKl62-13SQ&t=52s
Geo Proof 2 Brand:
https://www.youtube.com/watch?v=E1KUSEfr46k&t=12s
Geo Proof 4 Brand:
https://www.youtube.com/watch?v=d22iTENHGwU&t=69s
Geo Proof 6 Brand:
https://www.youtube.com/watch?v=VVwJ4J4pUFQ
5 more squared circle mathematical constants:
https://www.youtube.com/watch?v=BYlEvYflOps&t=6s
(Please download and read and keep the following Google drive link):
Geometric proof the real value of pi = 4/√φ = 3.144605511029693144:
https://drive.google.com/file/d/10p9S8aS5xNyenhOx14aVbX2Syygy4iOZ/view?usp=sharing
Π =3.14159.......Inconsistency in the number? What is an inconsistency in the number?
PURCHASE A ROLLING CIRCLE CUTTER WITH A RADIUS OF 50 CENTIMETERS:
PURCHASE A GOLDEN CIRCLE CUTTER WITH A 200-CENTIMETER DIAMETER FOR £65:
BRISTOL BOARD THAT IS LARGER THAN AO. MEASURMENT FOR BRISTOL BOARD = 3050MM X 1220MM:
Another source for purchasing large foam boards (The best source):
https://papergourmet.co.uk/view_prod_all_foams.asp?ID=58&make_sub=true&sub_ID=White&ID_mm=3mm
BEAM COMPASS WITH A RADIUS THAT IS LARGER THAN 500 MM:
https://www.londongraphics.co.uk/ecobra-beam-complete-compass
https://www.google.com/search?client=firefox-b-d&q=50-cm-beam-compass
(Please download and read and keep the Microsoft word document from the following Google drive link):
Template for writing an email to Pi tape for the purpose of requesting the creation of a custom made tape measure to be purchased :
How accurate is a Pi Tape?
Pi Tape metric tapes have a diameter accuracy of ± 0,03 mm up to 3 600 millimeters. Pi Tape inch tapes have a diameter accuracy of ± 0,001" up to 144 inches. In addition, Pi Tape can construct measuring tapes with customized lengths and widths to meet your every need.
https://www.metritools.com/en/products/pi_tape/pi_tape_en.htm
Special Pi Tape® Tapes: Precision Vernier Periphery Tapes for Direct Diameter Readings:
https://www.newmantools.com/pispecials.htm
Pi Tape® Inside Diameter Tape:
https://www.youtube.com/watch?v=2EjRItONoOc
Pi Tape Inside Diameter Tape O Ring Metric:
https://www.youtube.com/watch?v=_bdx1XIKTXI
Pi Tape Easy read:
http://www.pitape.co.uk/products.asp#Easy_Read
Pi tape standard:
http://www.pitape.co.uk/products.asp
Pi tape pricing:
http://www.pitape.co.uk/pdf/PiTapeEuroPriceList.pdf
Pi tape circumference measuring in America:
https://www.pitape.com/specs/2022-Custom-Made-Inside-Diameter-Tape-Price-List.pdf
Pi Tape periphery tape for inside diameter measurements in millimeters:
https://www.metritools.com/en/products/pi_tape/pi_tape_id_catalogue_en.htm
Pi Tape periphery tape for inside diameter O-Ring measurements in millimeters:
https://www.metritools.com/en/products/pi_tape/pi_tape_id_o-ring_catalogue_en.htm
O-Ring Inside Diameter Blue Easy to Read Metric:
https://www.pitape.com/products-oringtapes-blueeasytoread-metric.htm
CUSTOM MADE PRECISION INSIDE DIAMETER O‐RING TAPES:
https://www.pitape.com/specs/2022-Custom-Made-Precision-Inside-Diameter-O-Ring-Tape-Price-List.pdf
Pi Tape® Precision Digital Tapes:
https://www.newmantools.com/pi/digital_pi_tape.htm
Precision Digital Outside Diameter/Circumference Tapes:
https://www.pitape.com/products-digital-tapes.htm
Precision Digital Linear Tapes:
https://www.pitape.com/products-digital-linear-tapes.htm
Pi tape: (Digital measuring tapes included):
https://www.indiamart.com/bhavnatoolsagency/pi-tape.html
Inside Diameter Pi Tape Measuring Tools:
Pi Tape Digital Tapes for measuring circles:
Digital readout measurement device:
https://patents.google.com/patent/US20120330607
Digital pi tapes:
https://store.measurenow.com/pi-tape-digital-tapes-p782.aspx
Pi Tape periphery digital tape:
https://www.metritools.com/en/products/pi_tape/pi_tape_digital_tape_en.htm
Inside Diameter 1095 Spring Steel Metric:
https://www.pitape.com/insidediametertape-1095springsteel-metric.htm
Inside Diameter 716 Stainless Steel Metric:
https://www.pitape.com/insidediametertape-716stainlesssteel-metric.htm
Inside Diameter Blue Easy to Read Metric:
https://www.pitape.com/insidediametertape-blueeasytoread-metric.htm
Another source to buy a Pi tape measure from:
SOFT 5 METER PLUS ENGINEERING TAPE 1:
5m Circumference / Diameter Tape - Woven Fibre
4 meter engineering tape:
Images of tape meausres including digital pi tapes:
Purchase a spirit level:
CNC machine center profit H08 from Format4® | Felder Group:
https://www.youtube.com/watch?v=aOd3xrqzCfg
Felder group: FORMAT-4® - profit H08 - CNC machining center:
https://www.youtube.com/watch?v=EkOYPmYUAKU
Custom Wooden circles cut and made to order.
Plywood Circle Cutting Service:
https://one-stop-diy.co.uk/pages/plywood-circle-cutting/
Cylinder circle should be 18mm thick.
Contact phone number: 0208 980 1177.
Cylinder with a diameter of 1 meter.
Cut wooden circles up to a diameter of 1820mm.
(Birch wood)
CNC Cutting Services in London | Free Quotation | CNC.london:
https://cnc.london/?gclid=EAIaIQobChMIi-yW27X03AIVWvhRCh0T6gUeEAMYAiAAEgIOR_D_BwE
CNC services in the United Kingdom:
More information about the true value of Pi = 4/√φ = 3.144605511029693144:
https://www.gabitos.com/LIBREPENSADORSINCENSURA/template.php?nm=1628035050
Hush : The traditional value of Pi = 3.141592653589793 is wrong and dangerous
Any ratio that is not the result of a circle's circumference divided by a circle's diameter is not pi and that should be easy for any mathematician to understand.
The traditional value of Pi = 3.141592653589793 is wrong because it has not been derived from dividing the circumference of a circle by the diameter of a circle, instead the traditional value of pi = 3.141592653589793 was originally derived from Archimedes’ multiple polygon limit calculus approach that involves constructing circles around polygons and also constructing circles inside of polygons.
Constructing circles inside of polygons and also constructing circles around polygons is not the same as circumference of circle divided by diameter of circle.
It is impossible for a polygon to become a circle and that means that it does not matter how many edges that a polygon has there will forever be a gap between the edge of the polygon and the curvature of the circle that contains the polygon.
A circle does not have any edges.
It is impossible for a polygon with an infinite amount of edges to exist because a polygon is known and identified by the amount of edges that a polygon has for example a decagon is a polygon that is known to have 10 edges.
Archimedes’ multiple polygon calculus limit approach to finding pi can only produce approximations for Pi but never produce the real value of Pi.
Using calculus to discover Pi is a waste of time and effort because there will forever be an area under the curvature of a circle because the curvature of a circle is fractal in nature. The more the area under a curve is magnified the more crevices can become visible.
Academic mathematicians of today are now using computer simulations based on a infinite series of numbers that they assume will just magically result in the correct value of Pi but the problem with infinite series is how can anybody use a random series of numbers to converge to Pi when they have not discovered Pi due to the fact that they have never divided the circumference of a circle by the diameter of a circle in their entire lives?
Infinite series is not the same as circumference of circle divided by diameter of circle and that means that anybody that is using infinite series to find Pi is either knowingly or unknowingly an idiot.
Pi means circumference of circle divided by diameter of circle.
I am here to stop mathematicians from committing fraud.
If an individual does not understand that any ratio that is not derived from a circle's circumference divided by a circle's diameter is not Pi then that individual is confused.
Academic Mathematicians are committing fraud by claiming that the ratio 3.141592653589793 is the correct value of Pi.
It is wrong for Academic mathematicians to claim that Pi MUST be transcendental and Squaring the circle is impossible when the fact remains that mathematicians do NOT know what the correct value for Pi is because Academic mathematicians are only using an approximation of Pi due to their refusal to measure a circle with a diameter of 1-meter and count the amount of times the 1-meter diameter fits around the curvature of the circle.
To discover the correct value of Pi the circumference of a circle MUST be divived by the diameter of a circle to discover Pi or alternatively divide the surface area of a circle by the surface area of the square that is located on the radius of the circle.
The correct value for pi is 4/√φ = 3.1446055110296931442782343433718357180924882313508929506596078804
The correct value for pi is 4/√φ = 3.1446055110296931442782343433718357180924882313508929506596078804...
The correct value for pi = 4/√φ = 3.144605511029693144 is NOT transcendental because of the following minimal polynomial that is associated with it:
x4 + 16 x2 - 256
The correct value for pi can be confirmed by creating a circle with a diameter of 1-meter upon a piece of foam board that is larger than A0 such as 2A0 with a beam compass with a radius of 50 centimeters and also a rotary circle cutter with a radius of 50 centimeters.
A 4 meter tape measure can be used to measure the amount of times the diameter of 1-meter fits around the curvature of the circle to determine the circumference of the circle, so that the circumference of the circle circle can be divided by the diameter of the circle with 1-meter to discover the true value of pi.
Experiments involving physical measurement of a circle with a diameter of 1-meter have confirmed that the correct value of pi is a minimum of 3.1446 and is larger than the assumed value of pi = 3.1415.
The decimal expansion for pi is infinite and to discover the decimal expansion for pi beyond 3.1446 4 MUST be divided by 3.1446. 4 divided by 3.1446 = the ratio 1.2720218787763.
4 divided by the ratio 1.2720218787763 = 3.1446.
The ratio 1.2720218787763 is an approximation of the square root of the golden ratio of √φ = 1.272019649514069, because the ratio 1.2720218787763 squared meaning that the ratio 1.2720218787763 times the ratio 1.2720218787763 = the ratio 1.6180396600856.
Proof that the Kepler right triangle is the key to the true value of Pi can also be demonstrated if the length of the measuring tape is a minimum of 4 meters = 4000 millimeters, because if the circumference of the 1-meter diameter circle = 3144.6 millimeters is marked and placed on a horizontal straight line while the 1-meter diameter of the circle = 1000 millimeters is multiplied 4 equal times on a vertical straight line the result is the circumference of the 1-meter diameter circle = 3144.6 millimeters is the shortest edge length of a Kepler right triangle while the multiplication of the 1-meter diameter of the circle = 1000 millimeters = 4000 millimeters is the second longest edge length of a Kepler right triangle.
The multiplication of the 1-meter diameter of the circle = 1000 millimeters by 4 equal parts is 4000 millimeters. 4000 divided by 3144.6 = the ratio 1.2720218787763.
The ratio 1.2720218787763 is an approximation of the square root of the golden ratio of √φ = 1.272019649514069, because the ratio 1.2720218787763 squared meaning that the ratio 1.2720218787763 times the ratio 1.2720218787763 = the ratio 1.6180396600856.
The ratio 1.6180396600856 is an approximation of the golden ratio of the square root of 5 plus 1 divided by 2 = (φ) = 1.61803398874895. It is evident that the infinite decimal expansion for the correct value of pi can be derived from the formula 4 divided by the square root of the golden ratio = 4/√φ = 3.144605511029693144..
Apply the Pythagorean theorem to the 2 right angles that are created from the results of the diameter of the circle being multiplied 4 equal times upon a vertical straight line while the circumference of the circle is placed upon a horizontal straight line, to get the hypotenuse of a Kepler right triangle.
A wooden circle with a diameter of 1-meter has also been measured and used to confirm that the correct value of pi is 4/√φ = 3.1446. Below are videos involving the measurement of circles with a diameter of 1-meter to prove that the correct value of pi = 4/√φ = 3.144605511029693144:
I must repeat: any ratio that is not the result of a circle's circumference divided by a circle's diameter is not Pi.
Introduction to the true value of Pi = 4/√φ = 3.144605511029693144 – Pi intro video brand:
https://m.youtube.com/watch?v=1DawMQ1LV6Q&list=LL&index=63
Proof 7 Part 1 Pi Circumf Measurement:
https://m.youtube.com/watch?v=fATlIzht7VI&list=LL&index=53
Pi tape foam board circle 1:
https://m.youtube.com/watch?v=KFGww0z6HRw&list=LL&index=50
Pi Tape Measurement Foam Board Circle 2:
https://m.youtube.com/watch?v=KTJsCzHLsEo&list=LL&index=49
Pi Tape Measurement Foam Board Circle 3:
https://m.youtube.com/watch?v=ehjANdRlktw&list=LL&index=48
Pi tape measurement Hardwood :
https://m.youtube.com/watch?v=DSAK6XcdVuI&list=LL&index=51
Pi video Math brand:
https://m.youtube.com/watch?v=nvja8rGCbzY&list=LL&index=60
Geo Proof 1 Brand:
https://m.youtube.com/watch?v=FBKl62-13SQ&list=LL&index=58
Geo Proof 2 Brand:
https://m.youtube.com/watch?v=E1KUSEfr46k&list=LL&index=57
Geo Proof 4 Brand:
https://m.youtube.com/watch?v=d22iTENHGwU&list=LL&index=56
Geo Proof 6 Brand:
https://m.youtube.com/watch?v=VVwJ4J4pUFQ&list=LL&index=55
5 More Constants Brand:
https://m.youtube.com/watch?v=BYlEvYflOps&list=LL&index=54
Fixing and Correcting the problems caused by using Traditional Π = Pi
https://www.youtube.com/watch?v=X1ZAtn6g-Vg
Harry Lear Interview Apophis & Pi:
https://m.youtube.com/watch?v=QKYxk_epDzQ&list=LL&index=29
www.measuringpisquaringphi.com
PYTHAGOREAN THEOREM:
https://en.wikipedia.org/wiki/Pythagorean_theorem
Golden ratio:
https://en.wikipedia.org/wiki/Golden_ratio
Back to basics: How to measure a circle article about Pi:
https://www.thunderbolts.info/forum3/phpBB3/viewtopic.php?f=11&t=341
Traditional Π = Pi = (51066975/16255123) = 3.141592653589793 is false.
Traditional Π = Pi = (10 ^ 12)/(16255123/10213395)/(2)/(10 ^ 11) = 3.141592653589793 is false and is also the result of the perimeter of a regular polygon with more than a trillion edges divided by the diagonal of the polygon that has a perimeter with more than a trillion edges.
Perimeter of the regular polygon = 1000,000,000,000,000,000,000,000,000,000,000,000,000,000.
That is 1 Plus 42 zeros.
Commas removed = 1000000000000000000000000000000000000000000.
Diagonal of a regular polygon with 1000,000,000,000,000,000,000,000,000,000,000,000,000,000 edges = the ratio 3.183098861837902e + 82.
1000,000,000,000,000,000,000,000,000,000,000,000,000,000
divided by 3.183098861837902e + 82 =
3.14159265358979769496178102.
(10 ^ 42)/(3.183098861837902) = 3.141592653589793.
((10 ^ 42)/(30685681/9640191)) = 3.141592653589793.
Traditional Π = Pi = with 24 decimal places = 3.141,592,653,5897,976,949,617,8102
Traditional Π = Pi = with 15 decimal places = 3.141,592,653,589,793.
Regular Polygon calculator. Please remember to use a minimum of 15 digits to be accurate:
http://www.1728.org/polygon.htm
Regarding the chords and arcs of circles:
A chord is a straight line. The edge of a polygon is a chord.
An arc is a curve. The total arc length of a circle is the full curvature around the circle.
If an arc is attached to a chord in a circle then the length of the arc is longer than the length of the chord.
It is known that the curvature of a circle is longer than the chord length for the perimeter of a polygon that is contained inside of the circle and this knowledge makes it evident that the numerical value for the perimeter of a polygon is always the same as the numerical value for the division of the curvature of the circle that contains the polygon.
If the circumference of a circle is divided into 3 equal parts then the circumference of the circle will contain both 3 chords and 3 arcs and the length of 1 of the arcs will be longer than 1 of the 3 chords that make up the circumference of the circle.
If the circumference of a circle is divided into 8 equal parts then the circumference of the circle will contain both 8 chords and 8 arcs and the length of 1 of the arcs will be longer than 1 of the 8 chords that make up the circumference of the circle.
If the circumference of a circle is divided into 12 equal parts then the circumference of the circle will contain both 12 chords and 12 arcs and the length of 1 of the arcs will be longer than 1 of the 12 chords that make up the circumference of the circle.
The curvature of the circle when divided into equal divisions has the same numerical value as the perimeter of a polygon that is contained inside of the circle.
If a polygon is inscribed inside of a circle then the diagonal of the polygon and the diameter of the circle will have the same measure but the total curvature around the circle will be longer in measure than the perimeter of the polygon that is contained inside of the circle.
The correct definition for pi is the ratio for the circumference of a circle divided by the diameter of a circle.
Traditional Π = Pi = 4 divided by the square root of = 1.621138938277405 = 3.141592653589793 is false and does not come from the ratio for the circumference of a circle divided by the diameter of a circle.
Traditional Π = Pi = (4/√(48908982/30169519)) = 3.141592653589793 is false.
The correct value for pi cannot be derived from dividing the perimeter of a polygon with a trillion edges by the diagonal of the polygon with a trillion edges.
The measure for the curvature of a circle divided by the diameter of the circle produces the correct value for pi = 4 divided by the square root of the golden ratio = 4/√φ = 3.144605511029693144.
To discover the value for the curvature of a circle divided by the diameter of a circle a circle with a 1 meter diameter should be created and the number of times the 1 meter –diameter can be multiplied around the curvature of the circle must be measured and recorded to confirm the correct value of pi.
The measure for the curvature of the circle with a 1-meter diameter must be divided by the 1-meter diameter to confirm the correct value for pi.
Measurements from multiplying a 1-meter diameter for a circle around the curvature of a circle has already been recorded and the correct value for pi have been confirmed to be 3.1446 and not 3.141.
To get the rest of the digits for the true value of pi = 3.1446 a kepler right triangle can be used to create a square that has a perimeter that is equal in measure to the curvature of a circle.
If the second longest edge length for a Kepler right triangle is used as the diameter for a circle then the perimeter of the square that is located upon the shortest edge length for the Kepler right triangle can be confirmed to be the same measure as the curvature of the circle that has a diameter equal in measure to the second longest edge length for the Kepler right triangle.
When the perimeter of the square that is located on the shortest edge length for the Kepler right triangle is divided by the diameter of the circle that is equal in measure to the second longest edge length for the Kepler right triangle the correct value for pi = 4/√φ = 3.144605511029693144 is further proven and then the correct value for pi = 4/√φ = 3.144605511029693144 is multiplied by the diameter of the circle that is equal in measure to the second longest edge length for the Kepler right triangle the result is that the curvature of the circle is confirmed to be the same measure as perimeter of the square that is located on the shortest edge length for the Kepler.
The arc length of the circle is the same measure as the perimeter of the square because the square root of the golden ratio = √φ = 1.2720196495141 can allow the curvature of a circle to be placed on a straight line by using just compass and straight edge.
The Square root of the Golden ratio can be used to transfer the total curvature of a circle to a straight line. The Square root of the Golden ratio = √φ = 1.2720196495141 can turn curves into straight lines and straight lines back into curves.
The square root of the golden ratio = √φ = 1.2720196495141 can be used to transform curves into straight lines and straight lines into curves.
The claim that the perimeter of the square is the same measure as the arc length of the circle due to the measure of the arc length of the circle being derived with the use of the square root of the golden ratio = √φ = 1.272019649514069 can be confirmed if a circle with a 1-meter diameter is created and the diameter of the circle is multiplied around the curvature of the circle confirming that the correct value for pi must be 3.1446.
The Kepler right triangle also confirms that ratio for a circle’s circumference divided by a circle’s diameter is 3.1446.
THE REAL VALUE OF Pi IS NOT TRANSCENDENTAL BECAUSE THE REAL VALUE OF PI = 4/√φ = 3.144605511029693144 IS THE ONLY VALUE OF PI THAT CAN FIT THE FOLLOWING POLYNOMIAL EQUATION:
4th dimensional equation/polynomial for Golden Pi = 4/√φ = 3.144605511029693
Minimal polynomial:
x4 + 16x2 – 256 = 0.
Chord (geometry):
https://en.wikipedia.org/wiki/Chord_(geometry)
Hush : Pi is NOT needed to create a circle instead a compass is used to create a circle because a circle is a plane figure in geometry with points that are equally distant from the center.
Pi is derived from measuring the amount of times the diameter of a circle fits around the curvature of the cirle to deterimine the circumference of the circle then the circumference of the circle is divided by the diameter of the circle = Pi.
Circle:
Dear Liddz,
Squaring the Circle, a popular technique demonstrated by the FIGU Radicals to fake the Pi = 3.1446 proof, doesn't work and is simply impossible. For one Pi has been proven to be a transcendental number therefore its value cannot be reproduced geometrically which is why squaring the circle technique inevitably fails.
Secondly squaring the circle doesn't resolve the true and accurate circle circumference length. Although the pretty-fancy squaring the circle drawing derives a circle radius using the golden ratio geometry, you still don't know the true and accurate length of the constructed circle circumference 'C'.
Because you do not know 'C' nor 'Pi' for that matter, rather than try and solve for these variables, like a mathematician, the FIGU Radicals cheat by assuming a value for Pi = 3.1446; a number plucked out of thin air, and with this fake Pi = 3.1446, you then calculate a fake circle circumference C. Since C is based on a faked Pi = 3.1446, you end up with a fake C = 4 and then you bozo's jump for joy when your fake Pi = 3.1446 generates a fake C = 4 that matches the legitimate perimeter of the square equal to 4. However the true and correct circle circumference C, if you could actually determine its value, is 3.996168 NOT 4.0. With your squaring the circle method, you don't actually know C because you calculate C using your fake Pi = 3.1446. Are you following any of this - any of you FIGU Radicals able to keep up?
Further claiming the true and correct Pi = 3.1446 contradicts Contact Report 722, where Billy Meier clearly states the true and correct Pi is unknown.
Why do you FIGU Radicals, continue to promote Pi = 3.1446 when Billy clearly states the true and correct Pi is unknown in CR 722 which was published 5-years ago on Aug 8, 2019? Even before CR 722, in CR 712, Ptaah also states the true and correct Pi is unknown. Ptaah further clarifies in CR 712 traditional Pi = 3.14159 is currently the best estimate of true Pi and may be used for all Earthly circular computations in both math and physics. This is also common knowledge among every scientist, mathematician and engineer in the world.
So isn't it interesting the Plejaren, Billy and all the Earth scientists agree there is NO precise value for Pi currently known to mankind yet there are a few numbskulls within the FIGU Community still promoting Pi = 3.1446. We can all thank Michael Horn for helping to spread this nonsense Pi = 3.1446 within the FIGU Community.
Michael Horn is the culprit responsible for introducing Harry Lear's Pi = 3.1446 nonsense to the FIGU Community. As recently as June 2024, Michael, in response to a Pi related question on his blog, provides a link to Harry Lear's Pi = 3.1446 nonsense website lies 5-YEARS after Billy clearly states the true and correct Pi is unknown in CR 722. Doesn't Michael Horn read and understand Billy's Contact Reports. You don't need to be a Rocket Scientist to understand the truth about Pi, just reading Billy's the Contact Reports 712 and 722 to understand the truth.
By Christian Frehner
Then Michael, being the moron he can be, introduced Harry Lear's Pi=3.1446 nonsense to Christian Frehner and then Christian, also acting like a moron, who lacks any skills in mathematics, and completely unqualified to make an accurate statement about Pi, foolishly publishes FIGU Bulletin Article 77 where Christian claims, on behalf of the FIGU Community, Harry's Pi = 3.1446 is the true and correct value. Neither Christian nor Michael have the humility and integrity to acknowledge the accuracy of Billy's and Ptaah's information about Pi in CR 712 & 722 and simply admit they made a mistake due to their inflated egos no doubt. Does beg the question and raises the fear of how easy it is for such complete nonsense to be fabricated, spread and accepted within the FIGU Community when the Contact Reports provide the perfect guide to the truth. It would seem there are a few within the FIGU Community who are about as smart as a jar of pickles.
In a way I'm disappointed the Plejaren have avoided advising Billy to stop this nonsense promoting Pi = 3.1446 within the FIGU Community. Billy could easily end this nonsense with a word. However, in way, Billy has already stated the true and correct Pi is unknown and Ptaah in CR 712, states traditional Pi = 3.14159 is the best estimate of true Pi. I guess the Plejaren must figure if we're too stupid to read and understand the clearly published information about Pi in the Contact Reports 712 & 722, I guess humans of Earth, deserve to be the morons you are acting like. Not me mind you, because I GET IT.
Hush Again, I'm graciously asking you to simply bring forth your own peer review in regards to the accuracy of Pi 3.14159265359. If you are correct in your review, then good, we'll gladly relinquish the idea that Pi 3.144606 is the true value of PI.
Otherwise... You are just blowing hot air and your level of understanding is as low as that of a newborn baby. #just_saying
Dear Arthur and Jude,
Come on now boys, if telling the truth is referred to as trolling what does that make you? Perhaps you are a little upset that every Pi = 3.1446 proof you've attempted to fake here has been easily dismissed and discounted? True, its hard to accept your fun-and-games Pi = 3.1446 nonsense has effectively come to an end which must hurt inside. Very sad for the FIGU Radicals, no one will listen to your nonsense.
Lets review the facts. There are two opposing views regarding Pi within the FIGU Community. There is a silent majority who appreciate the truthful and accurate statements by Billy Meier who has consistently proven to be correct and therefore would tend to accept Billy's statement the true and correct Pi is unknown in CR 722:
This silent majority may also be in favor of trusting Ptaah's statements in Contact Report 712, the true and correct Pi is unknown, later echoed by Billy in CR 722, but also that traditional Pi = 3.14159, is the best estimate of true Pi:
Interestingly Ptaah's statement in CR 712; traditional Pi = 3.14159 may be used for all round and circular calculations as well as for other areas of mathematics and physics, is supported by every scientist, engineer, and mathematician in the entire world. I mean the whole world knows Pi = 3.14159 is accurate as verified by Ptaah.
Now the opposing view, represented by a minor, vocal faction of 'know-it-all's' within the FIGU Community; namely the FIGU Radicals, who disregard and ignore Billy Meier's Contact Reports 712 & 722 information the true and correct Pi is unknown, and promote Harry Lear's nonsense belief the true and correct Pi = 3.1446.
Of the two opposing views within the FIGU Community regarding Pi, who should we trust? Hmm..choices....well on the same subject of Pi we have in this corner, Harry Lear and the FIGU Radicals (sounds like an 80s rock band), who claim the true and correct Pi = 3.1446. Who is Harry; well he is a retired, fake mathematician wanna-be, who makes pretty drawings and has above average coloring skills. And in the other corner we have Billy Meier, who states the true and correct Pi is unknown; and is the only human being on Earth who directly communicates with a benevolent extraterrestrial advanced race of humans that live in another dimension. Now a normal person within the FIGU Community who understands Billy's teachings, the choice is obviously Billy Meier's information is accurate and correct (as always) so where is your head at guys supporting a foolish belief the true and correct Pi = 3.1446 over Billy Meier's authentic Contact Reports information about Pi in CR 712 & CR 722. Are you guys seriously that stupid?
Might I remind you this forum, and the FIGU Community at large, is about spreading the truth according to Billy Meier's teachings, which has grown to a world-wide network founded from nothing. Therefore, when the FIGU Radicals chose to follow Harry Lear's lead pushing the true and correct Pi = 3.1446 nonsense onto the FIGU Community when Billy and Ptaah make clear the true and correct Pi is unknown, is completely disrespectful to Billy Meier, the FIGU Community and the FIGU Mission at large. Honestly you FIGU Radicals should be embarrassed by your disrespectful, deceptive behavior within the FIGU Community spreading your lies. You've basically accomplished absolutely nothing as a result of your actions. No one, I mean no one of merit, in the entire world believes your gibberish nonsense Pi = 3.1446 except your small group of misfits. Seriously your promoting a lost cause. Too stubborn and brainwashed to admit it unfortunately!
Granted no one is obligated to accept Billy Meier's teachings, but he has proven to be consistently reliable, accurate, authentic and truthful from the very beginning so there's that! If you don't trust Billy Meier's information, including Billy's information about Pi in CRs 712 & 722, perhaps the FIGU Community and Billy's Mission isn't a good fit for the FIGU Radicals and you folks should move on; perhaps join the Flat-Earth Society where Pi = 3.1446 might actually work in this fantasy world. But here, within the FIGU Community, the focus tends to be on discussing the truth according to Billy Meier which you chose to ignore at least within respect to Billy's information regarding Pi in CRs 712 & 722.
We can thank both Michael Horn and Christian Frehner's exemplary stupidity for helping to promote the true and correct Pi = 3.1446 nonsense within the FIGU Community. Both Michael and Christian choose to ignore Billy Meier's accurate and precise information about Pi being unknown and instead foolishly promote Harry-the-clown-Lear's true and correct Pi = 3.1446 nonsense, as recently as June 2024.
Important information about the circular-ratio pi!
By Christian Frehner
Christian Frehner, a FIGU Core member, should know better than to have foolishly published Bulletin #77 supporting Harry Lear's true and correct Pi = 3.1446 nonsense instead of supporting Billy Meier's information about Pi where Billy makes it clear the true and correct Pi is unknown. One might ask why is a FIGU Core member promoting Harry Lear's true and correct Pi = 3.1446 lies rather than focusing on Billy Meier's information about Pi. Isn't the point of being a FIGU Core member to promote Billy Meier's truthful information?
Both Michael Horn and Christian Frehner, are COWARDS for staying silent and failing to acknowledge why they promote Harry Lear's true and correct Pi = 3.1446 lies, nonsense when they should be sharing and spreading Billy Meier's Contact Reports information about Pi and acknowledging Billy's correct and accurate statements about Pi in CRs 712 & 722. Perhaps Michael and Christian, pillars of the FIGU Community, have let it go to their heads and their egos, and think they are above everyone else, infallible and beyond reproach, like a corrupt politician who prefers to hide, rather than admit their mistakes. Disgusting!
l=1
P=4l
C=P
R= C/2pi
With Pi 3.14159265359:
4 / (2 ⋅ π) = 0.636619772368 to which is half of 1.273239544735.
1.273239544735 is as close as it gets to the square root of the Golden Ratio.
Now the rest is simple:
4/1.272019649514 = Pi = 3.14460551103
Humans can lie, but maths never lie.
Squaring the circle geometrically speaking as per Wikipedia is IMPOSSIBLE (as far as we all know... This might change if we are able to do it geometrically to uncover similarities between the area and the perimeter).
So far, only perimeter to circumference is valid. That's why IT WORKS geometrically speaking with 3.14460551103 and not with 3.14159265359.
In [CR 399] (https://www.futureofmankind.co.uk/Billy_Meier/CONTACT_REPORT_399), Billy gives flowers to Archimedes for his contributions to mathematics despite living in ancient times but comments on mostly to the fact that he did not need help from extraterrestrials to achieve his goal. But... As Liddz clearly mentions in a comment above, Archimedes' circle is made out of a 96-gon, which is a polygon, and... CIRCLES ARE NOT POLYGONS.
If such was the case, then the area under the curve which is showing that there are more numbers to Pi in expansion.
The way mathematicians today are seeing the circle is the same as a blacksmith looking at rough edges of a sword and has to polish it over and over to attain perfection.
Perfection comes only through the evolutive knowledge. You have ideas, you test your ideas, make mistakes and learn from those mistakes so that the ideas may bloom like flowers under the sun.
I partially read CR 712. If one does not acquaint himself/herself in analysis of semantics, one might spew non-sense like Hush does.
Billy:
Yes, I know, and he fell between all the chairs and benches in the process and had to pay another 15,000 marks for it. Unfortunately, I could not stop him from suing the journalist in court. But something else, namely in relation to the Pi number. Apparently this does not allow the earthlings to say that it is not correct, as well as the fact that several other calculations have been made and have come to other results than have been mentioned for the Pi number since time immemorial. And why I now mention this number again is because it has been brought to my attention that once again someone or several persons want to recalculate everything and prove that the old number is correct after all, because they simply do not want to understand that it is wrong according to your statements.
Ptaah:
The reason Hush is presenting himself this way is because he does what other generally do when they open a book... They just go with what fits with their narratives and leaves the rest out of context... Like religious/sectarian fools.
It is specific to mention the last part where Ptaah explicitly says that earthly scientific mathematical experts and know-it-alls won't get to that result. Nowhere did it say truthseekers.
In CR 722, it has only one mention of Pi:
All this is the case because the primitive technology of today, which is still in its infancy, cannot produce effectively profound results that correspond to reality, which is why it has not yet been possible to determine the correctness of the Pi number.
This is a general assertion in relation to the current Pi. Not everyone knows of 3.144606 being the true value of PI. Only a few knows. That's a given!
In all three aforementioned CR, except for contact report 260 (shown through Guido's calculations), they do not provide the value of PI. They merely state that the Pi number is wrong and calculations are still on-going for it accuracy. Which Pi? If by popular belief 3.14159265359 is the correct value of PI, then it is in general this Pi that Billy and Ptaah recognize 3.14159265359 as false, and needs to be reviewed further for accuracy.
All constructions I have done on my end whether geometrically or mathematically yield the same results... Over and over... Always 3.144606.
Sooooooooo..... 
[unknown] that's why they don't change a thing. If it doesn't bring profit, it's no good.
The number of calculators in the market with bad programming is unthinkable. All with trigonometric errors, pi errors, potential e (2.71828...) errors as well.
My head just hurts just thinking about how well they protect their errors. All for profit.
Dear Arthur and Jude,
You're the only two boys I know who could fail an IQ test! Amazing the way you keep on lying, claiming the true and correct Pi = 3.1446 attempting to DISCREDIT Billy Meier's truthful and accurate Contact Reports information the true and correct Pi is unknown in CR 722.
Billy has already stated the true and correct Pi is unknown. You're just blowing wind with absolutely no proof the true and correct Pi = 3.1446. All you do is talk, talk talk like the know-it-all's you are; with absolutely no credible proof. Fortunately no one credible believes your BS that the true and correct Pi = 3.1446 because Billy Meier clearly states the true value of Pi is unknown in CR 712 & 722. Give it up already. For contradicting Billy Meier's statement the true and correct Pi is unknown, dear Arthur and Jude and the remaining pile of FIGU Radicals, you have officially earned the title of 'Bozo' (LOL).
Really the only folks in the world who believe Pi = 3.1446 is the FIGU Radicals tiny small group of uneducated misfits who think they're smarter than all the scientists, engineers and mathematicians in the entire world; such arrogance is unbelievable when you have absolutely no credible proof the true and correct Pi = 3.1446. Any proof you've presented claiming Pi = 3.1446 has always been faked too stupid to know any better and precisely why you're efforts are ignored by the rest of the world. You'd like to think that you're smarter than everyone else but nothing could be further from the truth.
We can thank both Michael Horn and Christian Frehner for their extraordinarily stupendous stupidity helping to promote the true and correct Pi = 3.1446 nonsense within the FIGU Community. Their actions have fueled the zombies within the FIGU Community like Arthur, Jude and the pile of FIGU Radicals to keep promoting their brain-dead lies the true and correct Pi = 3.1446 when Billy Meier clearly states its unknown in CR 722.
Instead if reading and understanding Billy Meier's information about Pi in the Contact Reports 712 & 722, Michael and Christian choose to foolishly promoted Harry-the-bozo-Lear's true and correct Pi = 3.1446 nonsense, as recently as June 2024.
Important information about the circular-ratio pi!
By Christian Frehner
Christian Frehner, a FIGU Core member, no smarter or wiser than a jar of pickles, foolishly published Bulletin #77 supporting Harry Lear's true and correct Pi = 3.1446 nonsense instead of referencing Billy Meier's information about Pi where Billy makes it clear the true and correct Pi is unknown. Why is a FIGU Core member promoting Harry Lear's true and correct Pi = 3.1446 lies when they should focus on Billy Meier's teachings and information about Pi. Makes no sense! The point of being a FIGU Core member is you are there to promote Billy Meier's truthful information which may be trusted. Honestly if you're a FIGU Core member you should really only trust the information shared by Billy Meier and NO ONE ELSE!
Christian has absolutely no background in mathematics and completely unqualified to make such a bold statement the true and correct Pi = 3.1446 when Billy Meier has only stated the true and correct Pi is unknown in CR 712 & CR 722. If you read CR 712 and read Ptaah's message with some intelligence, Ptaah is very clearly stating traditional Pi is the best estimate of true Pi as is common knowledge on Earth. As a FIGU Core member, you've lied to the FIGU Community essentially claiming that you have more knowledge than Billy Meier about the true and correct Pi value.
Originally credited Michael Horn and Christian Frehner, possessed the intellect to appreciate the accuracy of Billy Meier's information about Pi in CRs 712 & 722, as Billy states true Pi is unknown and Ptaah clarifies traditional Pi is the most accurate value (so far), and wrongly assumed Michael and Christian regretted promoting fake Pi = 3.1446, (which Billy has never endorsed) but too timid/cowardly to admit their mistake however, more likely, since neither understands mathematics and unable to make an informed intelligent decision regarding Pi, foolishly trusted Harry Lear's fake Pi = 3.1446 nonsense on faith, and wrongly assumed its valid, (like the blind leading the blind) and really just don't give a sh-- what Billy Meier's authentic and accurate information states about Pi in CRs 712 & 722. This is more likely the case. Complete indifference regarding sharing the truth.
Michael and Christian likely have no regrets spreading the fake Pi = 3.1446 lie to the FIGU Community even though Billy has never endorsed Pi = 3.1446 is valid. That should give everyone pause for concern that FIGU representatives could fabricate a lie the true and correct Pi = 3.1446, and successfully spread it to the trusting FIGU Community, knowing full well Billy Meier nor the Plejaren have never endorsed Pi = 3.1446. The only thing we know for certain from Billy is there is a minor error in traditional Pi = 3.14159 although it can still be used for all Earthly circular calculations however its true value remains unknown. For FIGU representative to fabricate a lie the true and correct Pi = 3.1446, something Billy has never stated, well the FIGU Mission is doomed with such poor representation. Yikes!
Now Arthur lets not put the cart before the horse. Important to keep your ducks in a row as they say. Here is a simple srtategy to help you along:
You see what you're talking about is step number 7), correcting infrastructure to use new Pi, which will indeed be expensive, but you're getting ahead of yourself and need to start at step 1) in the sequence, and then advance to step 2) and so on if you catch my drift. Does that makes sense?
We can thank both Michael Horn and Christian Frehner for their monumental stupidity helping to promote the true and correct Pi = 3.1446 nonsense within the FIGU Community. Neither Christian nor Micheal are knowledgeable in mathematics and both completely unqualified to make any statements about the accuracy of the Pi number other than what has been shared by Billy Meier in the Contact Reports specifically CR 712 and 722 which state the true and correct Pi is unknown.
Instead if reading and understanding Billy Meier's information about Pi in the Contact Reports 712 & 722, Michael and Christian choose to foolishly promoted Harry-the-bozo-Lear's true and correct Pi = 3.1446 nonsense, as recently as June 2024.
Important information about the circular-ratio pi!
By Christian Frehner
Christian Frehner, a FIGU Core member, who thinks he's smarter and wiser then Billy Meier, foolishly published Bulletin #77 supporting Harry Lear's true and correct Pi = 3.1446 nonsense instead of referencing Billy Meier's information about Pi where Billy makes it perfectly clear the true and correct Pi is unknown. As a FIGU Core member, Christian should be supporting Billy Meier instead of contradicting Billy Meier's statements about Pi or, at the very least, retracting your FIGU Bulletin #77 and humbly admit you were wrong. Like that's ever going to happen!
Here is an example of a FIGU Core member who doesn't understand perhaps he should be supporting and sharing Billy Meier's truthful knowledge including Billy's information the true value of Pi is unknown, but rather decides instead to promote the Pi = 3.1446 lie fabricated by a dimwitted human being of Earth. Honestly if you're a FIGU Core member you should really only trust the information shared by Billy Meier and NO ONE ELSE!
Both Michael Horn and Christian Frehner, have fallen victim to the Pi = 3.1446 lies spread by a human being of Earth, rather than listening to and trusting what Billy Meier and Ptaah state about Pi. The person they foolishly trusted which such a ridiculous claim the true and correct Pi = 3.1446, doesn't even have a university degree and only talent is cutting round wooden disks, making pretty drawing and has above average coloring skills, when Billy Meier makes it perfectly clear the true and correct Pi is unknown. Michael Horn and Christian Frehner believed the Pi = 3.1446 nonsense because they are unqualified to understand the mathematics of what they're supporting - like the blind leading the blind. They took a concept that there is an error in Pi, which Billy states, and blew it way out of proportion and ASSUMED and promoted the true and correct Pi = 3.1446 something Billy nor Ptaah nor any Plejaren have EVER stated is correct. Yet the human fools of Earth made the ASSUMPTION the true and correct Pi = 3.146.
The Pi = 3.1446 nonsense needs to be purged before Apophis becomes daily news in the media and we can't have folks within the FIGU Community looking like fools promoting Pi = 3.1446 lie. That would be terrible as it makes the FIGU Mission look like a bunch of idiots in front of the world-wide academic community. No academic will ever take the FIGU Mission seriously as long as the FIGU Community are promoting Pi = 3.1446. God there are some stubborn stupid people within this Community; pretty sad.
Arthur you don't know the actual circle circumference with your squaring technique. You draw a circle but you really have no idea what the actual circumference is. You don't know the circle circumference C nor do you know Pi and that's the problem with the squaring using golden ratio method. The golden ratio method offers no means to derive the accurate distance around a curve. What you do is cheat by calculating a circumference using your fake Pi however you have not actually solved for Pi or C, you've only assumed a Pi value. Assuming a value for Pi is not the same as solving for Pi - bozo.
You're probably not smart enough to understand this, but you have to find a way to solve for C without knowing Pi. One method to solve for the 'ACTUAL' circle circumference C, without knowing Pi (which you don't know) is to use polygons whose perimeter length approximates the circle circumference. What you bozo's do is assume a value of Pi = 3.1446 without actually first deriving the value for Pi. You just pull a Pi number out of thin air without first properly solving for Pi.
Billy has already stated the true and correct Pi is unknown. You're just blowing wind with absolutely no proof the true and correct Pi = 3.1446. All you do is talk, talk talk like the know-it-all's you are; with absolutely no credible proof.
We can thank both Michael Horn and Christian Frehner for their monumental stupidity helping to promote the true and correct Pi = 3.1446 nonsense within the FIGU Community. Neither Christian nor Micheal are knowledgeable in mathematics and both completely unqualified to make any statements about the accuracy of the Pi number other than what has been shared by Billy Meier in the Contact Reports specifically CR 712 and 722 which state the true and correct Pi is unknown.
Instead if reading and understanding Billy Meier's information about Pi in the Contact Reports 712 & 722, Michael and Christian choose to foolishly promote Harry-the-bozo-Lear's true and correct Pi = 3.1446 nonsense, as recently as June 2024.
Important information about the circular-ratio pi!
By Christian Frehner
Christian Frehner, a FIGU Core member, who thinks he's smarter and wiser then Billy Meier, foolishly published Bulletin #77 supporting Harry Lear's true and correct Pi = 3.1446 nonsense instead of referencing Billy Meier's information about Pi where Billy makes it perfectly clear the true and correct Pi is unknown. As a FIGU Core member, Christian, should be supporting Billy Meier rather than rather than contradicting Billy Meier.
Here is an example of a FIGU Core member who doesn't understand perhaps he should be supporting and sharing Billy Meier's truthful knowledge including Billy's information the true value of Pi is unknown, but rather decides instead to promote the Pi = 3.1446 lie fabricated by a dimwitted human being of Earth. Honestly if you're a FIGU Core member you should really only trust the information shared by Billy Meier and NO ONE ELSE!
Both Michael Horn and Christian Frehner, have fallen victim to the Pi = 3.1446 lies spread by a human being of Earth, rather than listening to and trusting what Billy Meier and Ptaah state about Pi. The person they foolishly trusted which such a ridiculous claim the true and correct Pi = 3.1446, doesn't even have a university degree and only talent is cutting round wooden disks, making pretty drawing and has above average coloring skills, when Billy Meier makes it perfectly clear the true and correct Pi is unknown. Michael Horn and Christian Frehner believed the Pi = 3.1446 nonsense because they are unqualified to understand the mathematics of what they're supporting - like the blind leading the blind. They took a concept that there is an error in Pi, which Billy states, and blew it way out of proportion and ASSUMED and promoted the true and correct Pi = 3.1446 something Billy nor Ptaah nor any Plejaren have EVER stated is correct. There are a number of not very intelligent folks within this community unfortunately but the Pi = 3.1446 nonsense needs to be purged before Apophis becomes daily news in the media and we can't have folks within the FIGU Community looking like fools promoting Pi = 3.1446. That would be terrible as it makes the FIGU Mission look like a bunch of idots.
