I know its only been a few minutes but you guys have already probably forgotten so here it is again, a quote directly from BILLY MEIER.

From ChatGPT

Let's explore the scenario where (\pi) is taken to be (\frac{4}{\sqrt{\frac{1 + \sqrt{5}}{2}}}) and check whether this value would allow us to "square the circle" in terms of equating the perimeter of a square to the circumference of a circle.

Given:
[\pi' = \frac{4}{\sqrt{\frac{1 + \sqrt{5}}{2}}} \approx 3.144605511029693]

The circumference of a circle with radius (r) is:
[C = 2\pi'r]

The perimeter of a square with side length (s) is:
[P = 4s]

For the perimeters to be equal:
[4s = 2\pi'r]

Solving for (s):
[s = \frac{\pi'}{2}r]

If (\pi') is our approximation, we use:
[s = \frac{\frac{4}{\sqrt{\frac{1 + \sqrt{5}}{2}}}}{2}r = \frac{2}{\sqrt{\frac{1 + \sqrt{5}}{2}}}r]

Now, substituting the value we found for (\pi'):
[s \approx \frac{2}{1.272019649514069}r \approx 1.572303r]

Thus, the side length (s) in this scenario would be approximately (1.572303r).

To check if this results in the equality of perimeters:
[P = 4s = 4 \times 1.572303r = 6.289212r]

And the circumference with the approximation:
[C = 2\pi'r = 2 \times 3.144605511029693r = 6.289211022059386r]

The perimeter (P) and the circumference (C) are almost equal:
[P \approx 6.289212r \quad \text{and} \quad C \approx 6.289211022059386r]

The slight discrepancy is due to the approximation, but for practical purposes, the values are very close. If we accept (\pi') as the true value, this approximation would effectively "square the circle" in terms of equating the perimeter of a square to the circumference of a circle within a very small margin of error.

Thus, in the hypothetical scenario where (\pi) is (\frac{4}{\sqrt{\frac{1 + \sqrt{5}}{2}}}), it would be possible to square the circle in terms of matching perimeters.

I think its that time again for another reminder, the true and correct Pi value is unknown to Earth humans and why Pi cannot equal 3.1446.

3.1446 to 10000dp

3.1446055110296931442782343433718357180924882313508929506596078804047281904892436548476515566340325422595160489765784452235018414818847721014580011238453531659969963123944614330895602447224013851373131501976513250168886718624703787313359434961827623424884419929696155384972370055738355223468907453641698014204369640943817463269453772663395414398903709747924249157889297802333906441767084172268827515380592173997026423023851194242244081992685573437499657987944611238911016107551387207358281657572181883283516336139159023992353694690024845170044516992781985453761660350519720800718970644071409668757828437246633219026822340025407725353821526637922670369853908547616452436921953232107331044735525949802311653660216067204763773809792592558234876801085351187469338952701406443781568048374310664077223404139952343917185562861066240175976669357645765480751311418697916950736513185281927426366978973484884146736468201663051035828968367940082442276210780785802770252790792921943126282608098219773061432750203769832808725865287498912581626581140009748401943411577843776243206288528365954477878391843923501520964658330213806533681247704545666156650176520538745023426537337216199116798036546310080849353194191628477601141842225719127299801602701900249389720597486680039551715733065452119282710198409519398660455770877352698826613553664026971444791321048997755259454451453592433166583096147832263615614138154725657091488617130869008436052191113133223128651608521483539075940219697516583747862490809641777908676092781462716229720285837081464694192139346984999334482768706279449744103087267966168475394065834354969502701497013169595496540317338477671787011008706850194234420104985060583231307820355729926230899153193228198373830575516863569225490574755523418878015347567333952523429235570248326169214265150817399067126435015425036285907554800874756667261620502882024054374171541454697225373685978997102821662967887357178976318114170532483373183492705782185952394547269697479274164061843530175103064056522820698554474105220328457714092415059472981300214404411276382330613904138030012639608679805796938610165599832039344056652870691814590470085159466406226844617180096053527363742959169511330481067018192884522378345584269879163228893371223605896464271273201914972471103364243911341140627998498824020233698620211329449955001776404739562497877140068649801182583335972809378941197298945089354093051294137541129355688277742264206598301751784194718865756809206641125362827264271117996109330902174673383399960198199728041255112961503138959412325107888280779291395345133901414397733159019442367533033053457775626977638220944358285895327332717632499058003279229353343861317652565821841331737245329298583401938968876366857054285729892675077503807711460582631231037639970968761133939664442125398885385478990472993575369900447684060880794516796730571069173132901909512907656804219717642750109415686371482957295518314696802507302144284073427902792709046015864196982482197981874494036598342423431303133708707647310415343465363795474223381535048322536909943016606042953227702020621878314610548422785320950458339389145421264904669940042190842547050530599116517268986513218815717358897419739797528818067069881854101179813379227276202110136659396323374382671362346974907805266415974796722355428977294786042559902749009654750279799319587723018944567275669009686146107069333081488896600725956566672458931040104098683091478260133393057739175255111238584912535697693645889388282413523997845865085447840292124112453162471429167846908445832942124051038988641799431827441261198184417224896384851614552370677180940574438579391682289529423208884560743270187805416158696465258692632676743887338306448867631997137494925020777563635066081983808293423561249682238980390440700952731336375552627428981034767911925476215156701391059019132746618443785699228668872092571502019892654538708927065371033430279651361022858800199098583564950685788222632494910367817216422542258429050704364206212518269096150792694761878714882905902770982506781538342919923847894635930178241913700978195677113731227065798547523036980264192721700186324972427690696622723552498700940177848128581470784089585421320378821892336589170592053685667235362138055374100658222672403141934033452130816060365603131623647183458859087943495123472350375132997586769097279715732058046239276837798085834370293972019007083629955350019773672468515794353192638210833917096526876355839883676512259065790390262829730910700258934675810774462533615297243507904614394990625555940801658432242130993685000441833345119577262157148673009099214387443794603514291787886167801254194940558693395548965199963883390955207569739961962384188735083357866045075958418123364194122458738568205674746312574167709078636426185986080105385557527567723934218862504710658131730062640488310502656833945000492241095332090278236207917559691115199094421779609784332973757766817950253579272124962329177056702251896296472157312427996096392282896012904605803297882401476137440214141200439109583136817803714695715871236018634929715996135590966623742282862477377554449968270554798959236811305356691058742654410237711563743636140769317023188677803260884084793110137280596107470332483114846921106451369964859605190382648198686490381960675855864175929573826899367983881428180571681079033768316864741098964803089919489399454606166499782726835042096713043307699360309042346028439513168775897077549938085104178114996842108589975927162700021220558135349634832624689600477636007574249384361799033946596843227834839126951944266259087628240172731217522408920808121107044118346145267534236392050485124907985987617237385288971000446500133036659540515215263172314527800768341359029927058894347738022838944473106570339654286110017309553867319721306717391987817120368623047604747218514291479550920700064152037139024280141290617416666238928099304886347892833057316594325769274397108147646566407683337830548731038266387650309275493417486257170623408087144099155545966067829758814182036209245961971563582863817201875533168779695934581613631368820473847391546760798506912404271731622154094901038523224301469991484306457409598413808128217939536807587507548860838926806906419566336572947281164818529827236375747997202669311627545192154162721744546826659378425498652868887187944158726980910080023174460142259874659258510694198869233682330563519788590323702182067727114201078264141064241868110329870899562738062674192687591424334768194633462454123808582270101352765827919497428158242570286519243664144115928188428179517969189038045909509221645591378140679873289427274343249709108318949302726032842416122993675157834777311560967497055479238367634762369215919465571511808245319893982017831213735042599772892814224837288085128128793479275503193198736455146902130715844594101246073946045215010384816444739050458188488833476459882031105148694143371418611105845313699913264639234900825098981024157183932352798517453480000785779800946442455018216990465311518821623536054355955477250453696426312398466388129551480150527612866367266844328369530944894859389543324043161710458919285804448240006461727756087179873987093517439414440125760357634913601273071545695379073685403323019493470793999284308230431729099828776735376628062164080654144939753721760703262988603439415602632570280178045734899671873581065233329809970453088325314877700446847858957175260413358637141972030811756499458316257948057561098245148684251695934294786585184200953216006054616110192467177380303549057547406334955680370697142621397028047524542034461672018631905784512225411655213366478825043879224278367017252080521731100671414418555054774097706500643975790142549988894887678039630604781392784425143411815364978494193608196810593226971967797251013503868621189536585468068038474859444954794796039571484524988701966944032830159305560877221623932725214260262292699833953560216361185591959608958126334337925818936975632176058739167544179330949565332962133198414674423865050645605104267637845048969553510390935318662653659455985779808436772764537779513178706697755793708650301189786691227895625841968940485704263248200567418699109179489348772930610491636128491299308878780383752927063270598235370883835040670717626316855788565429647665843729698623613334914030822164533911547398789325655541461326434704707627467062859779632828314453098795824308649559356319075978697570325773836463612101203488933948570217091794379794527946198183020107719349223041550126689454444881052264432746126818077300095370779530258224772603912989039390860755702945621691957133126819120195504236023009154005271421757038444771249299390066746790878221617229429304827736118561745027698232491430851358977089003939042279031297429265265117934932341906128528324103469707241692813479912876541954342635720138198481620422460960906067862451094550252448581537593838291756651294267544318968826213132076816456687830503174106195173383731825173660029858757042173288182623875624131409826476750982719600348490129604517083282989484509585442630903293892203389005278120978207864092350989308648298410334961981703650209444187104529716435554887175530759969378606062415609657808340658882960187133180782427407708109679681072019099315652008492944221311725149919599117541681973681915321514038272699869286764780237055658137065580791314601154697331184084428922094736954789145791661685151609045796457724860283306331690547609201001157500737222334643956418504650124174951708724205224859057375121357899333613810216443719994705527059707026461907307769105145635996477659991578389643431856454341047387341735743591862009685599326658945202625741122343682134035522702433901798356562655227766336391981857255356712455347244263792867622459720454885690220432002479411331649064334189747990528548219573659706118955767175665496093310908474647090102906446058246528399031549081918349003175662547412205805648167414092743327138423864526030700966962924938988867368063793431112362622555406205649894609519641773020355771276853859980340581324904728453194964289757162337780365864913734467869999560485918502821243819268267911476399985183458847682628524531428780498461214680080761859064938

now... grant you... and I might just shoot myself in the foot with this statement... CHATGPT IS NOT AS RELIABLE AS ONE WOULD THINK.

now the safeguard... WOLFRAM IS RELIABLE!

Jude that is a heck of a lot of numbers you've gone and calculated. Such dedication to a lost cause is truly a monumental feat, well done.

Yes its that time again, the FIGU Radical daily dose of Billy Meier's Contact Report #722, where he clearly states NO ONE from Earth knows the true and correct Pi value. However Billy's statement excludes anyone from another planet. Wondering if Jude and Arthur and the remaining pile of FIGU Radicals, are from another planet which explains their insistence of knowing the true Pi number and were probably abandoned on Earth as punishment for always getting the wrong answer to Pi on their home worlds (lol).

Jude and Liddz must aspire to the philosophy that its the size of your forum posts that matters.

The FIGU Radicals, who insist the true and correct Pi = 3.1446, are like horses with blinders and only see what they're programmed to see, like members of a brainwashed cult - and, I can prove it!

Below is a post I've copied repeatedly from Billy Meier's Contact Report #722, where Billy himself, states the TRUE AND CORRECT PI is UNKNOWN. Neither Jude nor Arthur have ever commented on it. Seriously, its like they can't see it.

The FIGU Radicals completely ignore Billy Meier's Contact Report information about Pi as if it were invisible. So as an experiment I've again posted Billy Meier's CR 722, where Billy states the true and correct Pi is unknown. Watch careful how Arthur and Jude respond. Arthur will probably recreate another pretty faked Pi = 3.1446 proof created by someone else and Jude will likely post several feet of random calculator images, but its virtually guaranteed, neither Arthur nor Jude will comment on Billy Meier's Contact Report #722 where Billy Meier clearly states the true and correct Pi is unknown.

Ok so here is CR 722 with Billy Meier's statement Pi is unknown, now everybody watch to see how the FIGU Radicals respond.

Maybe they'll say something this time because I've essentially pushed them into a corner, however if you go back and look over the last 100-posts on this topic, not one single FIGU Radical has EVER acknowledged nor commented on Billy Meier's Contact Reports 712 and 722.

This is because the FIGU Radicals are unable to see the TRUTH about Pi stated clearly in Billy Meier's Contact Reports CR 712 & 722 due to having been brainwashed into believing the true and correct Pi = 3.1446. This condition is referred to as Denialism and refers to a person's choice to deny reality as a way to avoid believing in a psychologically uncomfortable truth.

In Contact Report 712, Ptaah also states the true and correct Pi is unknown and that an instrumentarium, not yet invented, is required to find the true and correct Pi value. Ptaah also refers to the FIGU Radicals, indirectly as 'know-it-alls' or those who insist they've solved for the true and correct Pi value.

The FIGU Radicals are subconsciously aware of Billy Meier's Contact Reports #712 and #722 references to Pi, which state the true and correct Pi is unknown, but consciously unable to process this truthful knowledge. They are unable to see the truth, they cannot process the truth and are incapable of accepting the truth the true Pi value is unknown. This is because the TRUTH contradicts their behavioral brainwashed condition and the truth is too SHOCKING to the FIGU Radicals, unable to process the truth and literally block-out Billy Meier's accurate statements about Pi. That is why they have never commented on Billy Meier's truthful and accurate information about Pi in Contact Reports 712 and 722.

[unknown] actually it is my fault. I forced ChatGPT to calculate it with numbers for the sake of accuracy.

The True problem with ChatGPT is that it was made by humans who still follow the flawed Pi, so the answers provided by the GPT will not be 100% accurate especially if we calculate numbers with symbols. However it has proven to accurate up to 15dp.

That's why I looked for higher accuracy with Wolfram.

I want to express my appreciation to the FIGU Radicals for participating in my experiment which was a success. As predicted both Jude and Arthur, completely ignored the recent information I posted about Pi in Contact Reports 712 and 722 where both Ptaah and Billy make it perfectly clear the true and correct Pi is unknown. This was the FIGU Radicals predicted behavior, who ignored Billy Meier's information in CR 712 & CR 722 the true and correct Pi is unknown, because it does not align with the FIGU Radicals biased belief Pi = 3.1446.

As there is no credible proof Pi = 3.1446, this experiment highlights the FIGU Radicals blinding devotion in a false belief Pi = 3.1446 similar to a faith based cult or religion. The experiment demonstrates the FIGU Radicals uncanny ability to block and ignore trusted and reliable information from Billy Meier, unless it supports their Pi = 3.1446 bias.

The experiment highlights the FIGU Radicals are not so much interested in learning from Billy Meier and what Billy and the Plejaren are willing to teach us, but rather, that the FIGU Radicals ignore Billy Meier's teachings when its suites their personal agenda, and therefore urge caution regarding anything Arthur, Jude or any of the other FIGU Radicals have to say with respect to understanding the TRUTH. I know personally, I wouldn't believe anything they say unless it can be verified authentic, accurate and correct as they have repeatedly presented faked fraudulent proofs Pi = 3.1446, using every trick you can imagine, and quite frankly, cannot be trusted.

    [unknown] that is the exact method and the easiest to do. I thought I was the only one to find it. I'm glad that we are on the same vibe.

    [unknown] the steps for the squaring of the circle or that of the visualization?

    [unknown] I took the gap visualization from another video on YouTube relating to the same purpose (proving pi). I noticed that the equation was too complicated for me to reproduce so since I already have an account in desmos, I looked for the info directly from there which allowed me to save the visualization to my account (so already, credit is due to the original poster of the visualization).

    From the saved vizualization, I replaced all Pi elements with 3.14460551103... But I kept both for comparison purposes.

    [unknown] it is the best way. To learn through our mistakes and avoid making the same mistakes again.

    10 days later
    16 days later

    Hush : More information saying that Traditional Π = Pi = 3.141592653589793 is false:

    The currently accepted value of Pi = (10 ^ 12)/(16255123/10213395)/(2)/(10 ^ 11) = 3.141592653589793 and is called regular Pi by some mathematicians.

    Regular Pi = (10 ^ 12)/(16255123/10213395)/(2)/(10 ^ 11) = 3.141592653589793 is wrong and does NOT belong to a circle but belongs to a polygon with many edges instead and you MUST always remember that a circle does NOT have any edges so that further proves that Traditional Π = Pi = (10 ^ 12)/(16255123/10213395)/(2)/(10 ^ 11) = 3.141592653589793 is false.

    Traditional Π = Pi = (51066975/16255123) = 3.141592653589793 is false.

    Traditional Π = Pi = ((10 ^ 42)/(30685681/9640191)) = 3.141592653589793 is false.
    Traditional Π = (4/√(48908982/30169519)) = 3.141592653589793 is false.

    Common sense should tell you that a polygon and a circle are NOT the same thing but you are acting as if a circle and a polygon are the same thing when a circle is different from a polygon. A circle is defined by my dictionary as a plane figure with points that are equally distant from a central point.

    My dictionary says that a polygon is a plane figure with a minimum of 3 edges.
    A polygon can have many edges.

    It is impossible for a polygon to become a circle and that means that Pi MUST be larger than 3.141. 3.141 belongs to a polygon with more than a trillion edges but a circle does NOT have any edges. A polygon is identified and known by the number of edges that the polygon has got for example a Decagon is a polygon with 10 edges.

    It is impossible for a polygon with an infinite amount of edges to exist because a polygon is identified and known by a limited amount of edges.

    I repeat a circle does NOT have any edges.

    There will forever be a gap between the edge of the polygon and the curvature of the circle that contains the polygon it does NOT matter if the polygon has 10 ^ 98 edges because the gap between the edge of the polygon and the curvature of the circle that contains the polygon will forever remain.

    There can only be 1 Pi and that Pi MUST full-fill the following criteria:

    1. That Pi MUST fit the definition of Pi from the dictionary the ratio of a circle's circumference divided by a circle's diameter.

    2. That value of Pi Must have a physical counterpart. So that means the real value of Pi cannot be transcendental because transcendental numbers do NOT exist in the real world period. Transcendental numbers are only found on calculators.

    3. There must be more than 1 geometric proof for the true value of Pi including the squaring of the circle and that involves both the creation of a circle that has a circumference that is the same measure as the perimeter of a square with just the aid of compass and straight edge alone and also the creation of a circle and a square with the same surface area with just the aid of compass and straight edge alone.

    Only Golden Pi = 4/√φ = 3.144605511029693144 can be used to square a circle with just compass and straight edge alone.

    To calculate Pi accurately get a piece of foam board that is larger than A0 such as 2A0 and create upon the surface of the foam board that is larger than A0 such as 2A0 a circle with 1-meter diameter by using a beam compass with a radius of 50 centimeters.

    After the circle with a 1-meter diameter has been created upon the flat surface of the piece of foam board that is larger than A0 such as 2A0 use a Rotary circle cutter with a metal blade and a radius of also 50 centimeters to cut around the contours of the circumference of the circle with a 1-meter diameter that was created upon the flat surface of the foam board that is larger than A0 such as 2A0.

    The length of the tape measure should be a minimum of 3200 millimeters. Wrap the length of the tape measure around the contours of the circumference of the circle with a 1-meter diameter that was created upon the piece of foam board that is larger than A0 such as 2A0. Make sure that the measurements are facing towards your eyes by measuring inwards around the circumference of the circle. The measurement should go all around the circumference of the circle finishing back at the starting position.

    The diameter of the circle MUST be equal to a minimum of 1-meter = 1000 millimeters or 100 centimeters. Do NOT use a circle with a diameter that is smaller than 1-meter.

    If the diameter of the circle is reduced to 1 then the circumference of the circle is Pi.
    Count the amount of times the diameter of the circle fits around the circumference of the circle and then divide the measure for the circumference of the circle by the diameter of the circle to discover the true value of Pi = 3.1446.

    If the diameter of a circle is 1-meter = 1000 millimeters then the circumference of the circle has a measure of 3144.6 millimeters.

    3144.6 divided by 1000 = 3.1446.

    4 divided by 3.1446 = the ratio 1.272021878776315. The ratio 1.272021878776315 is an approximation of the square root of the Golden ratio = √φ = 1.272019649514069 because if the ratio 1.272021878776315 is squared the result is the ratio 1.618039660085626.

    The ratio 1.618039660085626 is an approximation of the Golden ratio = (√(5) plus 1)/2 = (φ) = 1.618033988749895.

    The ratio 1.618039660085626 squared = the ratio 2.618052341610009. The Golden ratio = (φ) = 1.618033988749895 squared = (√(5) plus 3)/2 = 2.618033988749895.

    Proof that the Kepler right triangle is the key to the true value of Pi can also be demonstrated if the length of the measuring tape is a minimum of 4 meters = 4000 millimeters, because if the circumference of the 1-meter diameter circle = 3144.6 millimeters is marked and placed on a horizontal straight line while the 1-meter diameter of the circle = 1000 millimeters is multiplied 4 equal times on a vertical straight line the result is the circumference of the 1-meter diameter circle = 3144.6 millimeters is the shortest edge length of a Kepler right triangle while the multiplication of the 1-meter diameter of the circle = 1000 millimeters = 4000 millimeters is the second longest edge length of a Kepler right triangle.

    The multiplication of the 1-meter diameter of the circle = 1000 millimeters by 4 equal parts is 4000 millimeters. 4000 divided by 3144.6 = the ratio 1.2720218787763.

    The ratio 1.2720218787763 is an approximation of the square root of the golden ratio of √φ = 1.272019649514069, because the ratio 1.2720218787763 squared meaning that the ratio 1.2720218787763 times the ratio 1.2720218787763 = the ratio 1.6180396600856.

    Apply the Pythagorean theorem to the 2 right angles that are created from the results of the diameter of the circle being multiplied 4 equal times upon a vertical straight line while the circumference of the circle is placed upon a horizontal straight line, to get the hypotenuse of a Kepler right triangle.

    We can find the correct decimal expansion for Pi as 4/√φ = 3.144605511029693144 and that is to 18 decimal places. We can have as many decimal places for Pi that are larger than 18 as long as we remember that the exact value for Pi = 4/√φ = 3.144605511029693144.

    Pi is also defined as the ratio of the area of a circle divided by the area of the square that is located on the radius of the circle.

    If a circle is created with a diameter that is the same measure as the longer edge length of a Square root of the golden ratio √φ = 1.272019649514069 rectangle then one-quarter of the circle’s circumference is the same measure as the shorter edge length of a Square root of the golden ratio √φ = 1.272019649514069 rectangle, plus both the surface area of the circle and the surface area of the Square root of the golden ratio √φ = 1.272019649514069 rectangle have the same surface area.

    A Square root of the golden ratio √φ = 1.272019649514069 rectangle can be divided into 8 Kepler right triangles and if the shortest edge length of a Kepler right triangle is reduced to 1 then the hypotenuse is equal to the Golden ratio of cosine (36 degrees) multiplied by 2 = (φ) = (√(5) plus 1)/2 = 1.618033988749895, while the second longest edge length of the Kepler right triangle is equal to the Square root of the golden ratio √φ = 1.272019649514069, according to the Pythagorean theorem.

    A Square root of the golden ratio √φ = 1.272019649514069 rectangle that has been divided into 8 Kepler right triangles has a surface area equal to 4 times √φ = 5.088078598056276. A circle with a diameter that is equal to the longer edge length of a Square root of the golden ratio √φ = 1.272019649514069 rectangle that has been divided into 8 Kepler right triangles also has a surface area equal to 4 times √φ = 5.088078598056276.

    The longer edge length of the Square root of the golden ratio √φ = 1.272019649514069 rectangle that has been divided into 8 Kepler right triangles has a surface area equal to 4 times √φ = 5.088078598056276 is also equal to 2 times √φ = 2.544039299028138.

    The shorter edge length of the Square root of the golden ratio √φ = 1.272019649514069 rectangle that has been divided into 8 Kepler right triangles has a surface area equal to 4 times √φ = 5.088078598056276 is also equal to 2.

    A circle with a diameter that is equal to the longer edge length of a Square root of the golden ratio √φ = 1.272019649514069 rectangle that has been divided into 8 Kepler right triangles also has a radius that is equal to the Square root of the golden ratio √φ = 1.272019649514069. √φ times √φ = the Golden ratio of cosine (36 degrees) multiplied by 2 = (φ) = (√(5) plus 1)/2 = 1.618033988749895.

    Circumference of the circle = 8.

    1-quarter of the circle’s circumference = 2.

    Diameter of the circle = 2 times √φ = 2.544039299028138.

    Radius of the circle = the Square root of the golden ratio √φ = 1.272019649514069.

    The surface area of the circle divided the surface area of the square that is located on the radius of the circle = 4/√φ = 3.144605511029693144, because 4/√φ times √φ times √φ = 4 times √φ/((φ)) = 4/√φ = 3.144605511029693144.

    Surface area of the circle = 4/√φ times √φ times √φ = 4 times √φ = 5.088078598056276.

    Radius of the circle = the Square root of the golden ratio √φ = 1.272019649514069.

    Radius of the circle squared = √φ times √φ = the Golden ratio of cosine (36 degrees) multiplied by 2 = (φ) = (√(5) plus 1)/2 = 1.618033988749895.

    Pi is also defined as the surface area of the circle divided the surface area of the square that is located on the radius of the circle.

    Any circle can be squared by using just compass and straight edge alone when using the real value of Pi = 4/√φ = 3.144605511029693144. After you have measured a circle with a 1 meter diameter to find the exact value of Pi for yourself the next stage is to square the circle to further prove that 4/√φ = 3.144605511029693144 is the real and true value for Pi.

    If you have a given circle and you want to create a square with a perimeter that has the same measure as the curvature of the circle then just use your calculator and divide the diameter of the circle by the square root of the Golden ratio = √φ = 1.272019649514069 and you will automatically have the width of a square that has a perimeter with the same exact measure as the curvature of the circle.

    Multiply Pi = 4/√φ = 3.144605511029693144 times the diameter of the circle to confirm that the circumference of the circle is the same exact measure as the perimeter of the square.

    To get the second quadrature of the circle just use the square root of the square root of the Golden ratio = √√φ = 1.127838485561682 by dividing the diameter of given circle to get the width of a square with the same surface area as the given circle.

    Please remember that the ratio √√φ = 1.127838485561682 is the square root of the ratio √φ = 1.272019649514069 and the ratio √φ = 1.272019649514069 is the square root of the Golden ratio of cosine (36 degrees) multiplied by 2 = (φ) = (√(5) plus 1)/2 = 1.618033988749895.

    The real value of pi is NOT transcendental because the real value of Pi = 4/√φ = 3.144605511029693144 is the only value of pi that can fit the following polynomial equation:

    4th dimensional equation/polynomial for Golden Pi =
    4/√φ = 3.144605511029693144

    Minimal polynomial: x4 + 16x2 – 256 = 0.

    https://www.tiger-algebra.com/drill/x~4-16x~2-256=0/

    The real value of Pi = 4/√φ = 3.144605511029693144: Please copy and paste the following link into your web browser if you cannot click onto the following link:

    https://www.wolframalpha.com/input/?i=4+divided+by+the+square+root+of+the+golden+ratio

    Please click on the red dots in the following link to confirm that the real value of Pi = 4/√φ = 3.1446 is not transcendental.

    The real value of pi = 4/√φ = 3.144605511029693144.

    Minimal polynomial: x4 + 16x2 – 256 = 0

    https://www.wolframalpha.com/input/?i=x4+%2b+16x2+%e2%80%93+256+%3d+0

    The True Value of Pi revealed = 4/√φ = 3.144605511029693144:

    https://www.youtube.com/watch?v=AHAOn7UfXt8

    The Great Pi conspiracy part 1:

    https://www.veteranstodayarchives.com/2015/02/05/pi/

    The Great Pi conspiracy part 2:

    https://www.veteranstodayarchives.com/2015/10/06/pi2/

    Physical measurement for the real value of Pi

    Pi Tape Measurement Foam Board Circle 1:

    https://www.youtube.com/watch?v=fATlIzht7VI

    Physical measurement for the real value of Pi

    Pi Tape Measurement Foam Board Circle 2:

    https://www.youtube.com/watch?v=KFGww0z6HRw&pbjreload=101

    Physical measurement for the real value of Pi

    Pi Tape Measurement Foam Board Circle 3:

    https://www.youtube.com/watch?v=KTJsCzHLsEo

    Physical measurement for the real value of Pi

    Measuring the circumference of a wooden cut circle with a 1-meter diameter part 1:

    https://www.youtube.com/watch?v=iVNrhqLN110

    Physical measurement for the real value of Pi

    Measuring the circumference of a wooden cut circle with a 1-meter diameter part 2:

    https://www.youtube.com/watch?v=Ck_pe81qZ9Q

    Physical measurement for the real value of Pi

    Measuring the circumference of a wooden cut circle with a 1-meter diameter part 3:

    https://www.youtube.com/watch?v=DSAK6XcdVuI

    Pi Math Proof:

    http://measuringpisquaringphi.com/pi-math-proof/

    Proof 7 Part 2 Pi Math Proof:

    https://www.youtube.com/watch?v=ohFXjnPOOnw&t=4s

    Kepler right triangle math proof for Pi;

    https://www.youtube.com/watch?v=nvja8rGCbzY&t=123s

    Fixing and Correcting the problems caused by using Traditional Π = Pi:

    https://www.youtube.com/watch?v=X1ZAtn6g-Vg

    Geo Proof 1 Brand:

    https://www.youtube.com/watch?v=FBKl62-13SQ&t=52s

    Geo Proof 2 Brand:

    https://www.youtube.com/watch?v=E1KUSEfr46k&t=12s

    Geo Proof 4 Brand:

    https://www.youtube.com/watch?v=d22iTENHGwU&t=69s

    Geo Proof 6 Brand:

    https://www.youtube.com/watch?v=VVwJ4J4pUFQ

    5 more squared circle mathematical constants:

    https://www.youtube.com/watch?v=BYlEvYflOps&t=6s

    (Please download and read and keep the following Google drive link):

    Geometric proof the real value of pi = 4/√φ = 3.144605511029693144:

    https://drive.google.com/file/d/10p9S8aS5xNyenhOx14aVbX2Syygy4iOZ/view?usp=sharing

    Π =3.14159.......Inconsistency in the number? What is an inconsistency in the number?

    https://www.academia.edu/75118373/%CF%80_3_14159_Contradiction_in_the_number_1_10_%CF%80_3_14_%CF%80_4_%CF%86?email_work_card=view-paper

    PURCHASE A ROLLING CIRCLE CUTTER WITH A RADIUS OF 50 CENTIMETERS:

    https://www.ebay.com/itm/NT-Cutter-Large-Fabric-Circle-Cutter-7-7-8-Inches-39-3-8-Inches-Diameter-1-/254292882803?_trksid=p2349526.m4383.l4275.c1#viTabs_0

    PURCHASE A GOLDEN CIRCLE CUTTER WITH A 200-CENTIMETER DIAMETER FOR £65:

    https://www.wholesaleglasscompany.co.uk/acatalog/Silberschnitt-Circle-Cutter-with-6-Steel-Wheels.html?gclid=EAIaIQobChMInd_Uz8GO4AIVyZ3tCh2L3whtEAQYBCABEgIEPPD_BwE#SID=163

    BRISTOL BOARD THAT IS LARGER THAN AO. MEASURMENT FOR BRISTOL BOARD = 3050MM X 1220MM:

    https://www.amazon.co.uk/White-Foamex-Sheet-CHOOSE-1189mm/dp/B00QQD6RIE/ref=pd_rhf_se_p_img_2?_encoding=UTF8&refRID=W6GPAP6ZDGE6ZVX8QZ5N&th=1

    Another source for purchasing large foam boards (The best source):

    https://papergourmet.co.uk/view_prod_all_foams.asp?ID=58&make_sub=true&sub_ID=White&ID_mm=3mm

    BEAM COMPASS WITH A RADIUS THAT IS LARGER THAN 500 MM:

    https://www.londongraphics.co.uk/ecobra-beam-complete-compass

    https://www.google.com/search?client=firefox-b-d&q=50-cm-beam-compass

    (Please download and read and keep the Microsoft word document from the following Google drive link):

    Template for writing an email to Pi tape for the purpose of requesting the creation of a custom made tape measure to be purchased :

    https://docs.google.com/document/d/1lsqpt_0lya39IncyvJStHGDmkbA0WZJ4/edit?usp=sharing&ouid=113498148517313993725&rtpof=true&sd=true

    How accurate is a Pi Tape?

    Pi Tape metric tapes have a diameter accuracy of ± 0,03 mm up to 3 600 millimeters. Pi Tape inch tapes have a diameter accuracy of ± 0,001" up to 144 inches. In addition, Pi Tape can construct measuring tapes with customized lengths and widths to meet your every need.

    https://www.metritools.com/en/products/pi_tape/pi_tape_en.htm

    Special Pi Tape® Tapes: Precision Vernier Periphery Tapes for Direct Diameter Readings:

    https://www.newmantools.com/pispecials.htm

    Pi Tape® Inside Diameter Tape:

    https://www.youtube.com/watch?v=2EjRItONoOc

    Pi Tape Inside Diameter Tape O Ring Metric:

    https://www.youtube.com/watch?v=_bdx1XIKTXI

    Pi Tape Easy read:

    http://www.pitape.co.uk/products.asp#Easy_Read

    Pi tape standard:

    http://www.pitape.co.uk/products.asp

    Pi tape pricing:

    http://www.pitape.co.uk/pdf/PiTapeEuroPriceList.pdf

    Pi tape circumference measuring in America:

    https://www.pitape.com/specs/2022-Custom-Made-Inside-Diameter-Tape-Price-List.pdf

    Pi Tape periphery tape for inside diameter measurements in millimeters:

    https://www.metritools.com/en/products/pi_tape/pi_tape_id_catalogue_en.htm

    Pi Tape periphery tape for inside diameter O-Ring measurements in millimeters:

    https://www.metritools.com/en/products/pi_tape/pi_tape_id_o-ring_catalogue_en.htm

    O-Ring Inside Diameter Blue Easy to Read Metric:

    https://www.pitape.com/products-oringtapes-blueeasytoread-metric.htm

    CUSTOM MADE PRECISION INSIDE DIAMETER O‐RING TAPES:

    https://www.pitape.com/specs/2022-Custom-Made-Precision-Inside-Diameter-O-Ring-Tape-Price-List.pdf

    Pi Tape® Precision Digital Tapes:

    https://www.newmantools.com/pi/digital_pi_tape.htm

    Precision Digital Outside Diameter/Circumference Tapes:

    https://www.pitape.com/products-digital-tapes.htm

    Precision Digital Linear Tapes:

    https://www.pitape.com/products-digital-linear-tapes.htm

    Pi tape: (Digital measuring tapes included):

    https://www.indiamart.com/bhavnatoolsagency/pi-tape.html

    Inside Diameter Pi Tape Measuring Tools:

    https://prideinstrument.en.made-in-china.com/product/QSnmwPfMRRrp/China-Inside-Diameter-Pi-Tape-Measuring-Tools.html

    Pi Tape Digital Tapes for measuring circles:

    Digital readout measurement device:

    https://patents.google.com/patent/US20120330607

    Digital pi tapes:

    https://store.measurenow.com/pi-tape-digital-tapes-p782.aspx

    Pi Tape periphery digital tape:

    https://www.metritools.com/en/products/pi_tape/pi_tape_digital_tape_en.htm

    Inside Diameter 1095 Spring Steel Metric:

    https://www.pitape.com/insidediametertape-1095springsteel-metric.htm

    Inside Diameter 716 Stainless Steel Metric:

    https://www.pitape.com/insidediametertape-716stainlesssteel-metric.htm

    Inside Diameter Blue Easy to Read Metric:

    https://www.pitape.com/insidediametertape-blueeasytoread-metric.htm

    Another source to buy a Pi tape measure from:

    https://www.google.com/search?q=Metric+Size+Pi+Tapes+from+15mm+to+4500mm%2C+internal-diameter.+Measuring+Tapes&client=firefox-b-d&sxsrf=APwXEdcWInDho-6aOjmDl6Qa4OxvqoIpLA%3A1681904928878&ei=INU_ZLmlNYiW8gLKzaqgDQ&ved=0ahUKEwi5tdOO8LX-AhUIi1wKHcqmCtQQ4dUDCA4&uact=5&oq=Metric+Size+Pi+Tapes+from+15mm+to+4500mm%2C+internal-diameter.+Measuring+Tapes&gs_lcp=Cgxnd3Mtd2l6LXNlcnAQAzoHCCMQsAMQJzoECCEQCjoFCAAQogRKBAhBGAFQuQdYx0dgqUxoAXAAeACAAZQBiAH1CZIBBDExLjOYAQCgAQHIAQHAAQE&sclient=gws-wiz-serp

    SOFT 5 METER PLUS ENGINEERING TAPE 1:

    5m Circumference / Diameter Tape - Woven Fibre

    4 meter engineering tape:

    https://www.google.com/search?client=opera&q=4-meter-engineering-tape+-+Google+Search&sourceid=opera&ie=UTF-8&oe=UTF-8

    Images of tape meausres including digital pi tapes:

    https://www.google.com/search?q=digital-pi-tape,inside-circumference&client=firefox-b-d&sxsrf=APwXEdfGQ9dj2Lmf7-rXpgo5cYwyweWzbg:1681909244922&source=lnms&tbm=isch&sa=X&ved=2ahUKEwj54tmYgLb-AhUFbsAKHdWGBv4Q_AUoAXoECAEQAw&biw=1517&bih=851&dpr=2

    Purchase a spirit level:

    https://www.homeflairdecor.co.uk/60cm-metal-spirit-level-by-supatool?gclid=Cj0KCQjwyJn5BRDrARIsADZ9ykE0o3OPFGSRfCdkH1aExBcpyCmPYZ3Mm4Ba1ZqVnwJmYdIF7GMR43AaAn6kEALw_wcB

    CNC machine center profit H08 from Format4® | Felder Group:

    https://www.youtube.com/watch?v=aOd3xrqzCfg

    Felder group: FORMAT-4® - profit H08 - CNC machining center:

    https://www.youtube.com/watch?v=EkOYPmYUAKU

    Custom Wooden circles cut and made to order.

    https://mdfdirect.co.uk/?gclid=CjwKCAjw7rWKBhAtEiwAJ3CWLFJVWMXpgBZs6sv5_Ika6f8vCQ34UWmiMWu-6PVf8kitaP6oyWEgKRoCyIUQAvD_BwE

    Plywood Circle Cutting Service:

    https://one-stop-diy.co.uk/pages/plywood-circle-cutting/

    Cylinder circle should be 18mm thick.

    Contact phone number: 0208 980 1177.

    Cylinder with a diameter of 1 meter.

    Cut wooden circles up to a diameter of 1820mm.

    (Birch wood)

    CNC Cutting Services in London | Free Quotation | CNC.london:

    https://cnc.london/?gclid=EAIaIQobChMIi-yW27X03AIVWvhRCh0T6gUeEAMYAiAAEgIOR_D_BwE

    CNC services in the United Kingdom:

    https://fractory.com/cnc-machining-services/?utm_campaign=11230816691&utm_source=google&utm_medium=cpc&utm_term=fractory&utm_content=111490746938&dvc=c&utm_custom=EAIaIQobChMI7smik5iY9QIVY2HmCh1s0QQVEAAYASADEgImmfD_BwE&gclid=EAIaIQobChMI7smik5iY9QIVY2HmCh1s0QQVEAAYASADEgImmfD_BwE

    More information about the true value of Pi = 4/√φ = 3.144605511029693144:

    https://www.gabitos.com/LIBREPENSADORSINCENSURA/template.php?nm=1628035050

      Hush : The traditional value of Pi = 3.141592653589793 is wrong and dangerous

      Any ratio that is not the result of a circle's circumference divided by a circle's diameter is not pi and that should be easy for any mathematician to understand.

      The traditional value of Pi = 3.141592653589793 is wrong because it has not been derived from dividing the circumference of a circle by the diameter of a circle, instead the traditional value of pi = 3.141592653589793 was originally derived from Archimedes’ multiple polygon limit calculus approach that involves constructing circles around polygons and also constructing circles inside of polygons.

      Constructing circles inside of polygons and also constructing circles around polygons is not the same as circumference of circle divided by diameter of circle.

      It is impossible for a polygon to become a circle and that means that it does not matter how many edges that a polygon has there will forever be a gap between the edge of the polygon and the curvature of the circle that contains the polygon.
      A circle does not have any edges.

      It is impossible for a polygon with an infinite amount of edges to exist because a polygon is known and identified by the amount of edges that a polygon has for example a decagon is a polygon that is known to have 10 edges.

      Archimedes’ multiple polygon calculus limit approach to finding pi can only produce approximations for Pi but never produce the real value of Pi.

      Using calculus to discover Pi is a waste of time and effort because there will forever be an area under the curvature of a circle because the curvature of a circle is fractal in nature. The more the area under a curve is magnified the more crevices can become visible.

      Academic mathematicians of today are now using computer simulations based on a infinite series of numbers that they assume will just magically result in the correct value of Pi but the problem with infinite series is how can anybody use a random series of numbers to converge to Pi when they have not discovered Pi due to the fact that they have never divided the circumference of a circle by the diameter of a circle in their entire lives?

      Infinite series is not the same as circumference of circle divided by diameter of circle and that means that anybody that is using infinite series to find Pi is either knowingly or unknowingly an idiot.

      Pi means circumference of circle divided by diameter of circle.

      I am here to stop mathematicians from committing fraud.

      If an individual does not understand that any ratio that is not derived from a circle's circumference divided by a circle's diameter is not Pi then that individual is confused.

      Academic Mathematicians are committing fraud by claiming that the ratio 3.141592653589793 is the correct value of Pi.

      It is wrong for Academic mathematicians to claim that Pi MUST be transcendental and Squaring the circle is impossible when the fact remains that mathematicians do NOT know what the correct value for Pi is because Academic mathematicians are only using an approximation of Pi due to their refusal to measure a circle with a diameter of 1-meter and count the amount of times the 1-meter diameter fits around the curvature of the circle.

      To discover the correct value of Pi the circumference of a circle MUST be divived by the diameter of a circle to discover Pi or alternatively divide the surface area of a circle by the surface area of the square that is located on the radius of the circle.

      The correct value for pi is 4/√φ = 3.1446055110296931442782343433718357180924882313508929506596078804

      The correct value for pi is 4/√φ = 3.1446055110296931442782343433718357180924882313508929506596078804...

      The correct value for pi = 4/√φ = 3.144605511029693144 is NOT transcendental because of the following minimal polynomial that is associated with it:

      x4 + 16 x2 - 256

      The correct value for pi can be confirmed by creating a circle with a diameter of 1-meter upon a piece of foam board that is larger than A0 such as 2A0 with a beam compass with a radius of 50 centimeters and also a rotary circle cutter with a radius of 50 centimeters.

      A 4 meter tape measure can be used to measure the amount of times the diameter of 1-meter fits around the curvature of the circle to determine the circumference of the circle, so that the circumference of the circle circle can be divided by the diameter of the circle with 1-meter to discover the true value of pi.

      Experiments involving physical measurement of a circle with a diameter of 1-meter have confirmed that the correct value of pi is a minimum of 3.1446 and is larger than the assumed value of pi = 3.1415.

      The decimal expansion for pi is infinite and to discover the decimal expansion for pi beyond 3.1446 4 MUST be divided by 3.1446. 4 divided by 3.1446 = the ratio 1.2720218787763.

      4 divided by the ratio 1.2720218787763 = 3.1446.

      The ratio 1.2720218787763 is an approximation of the square root of the golden ratio of √φ = 1.272019649514069, because the ratio 1.2720218787763 squared meaning that the ratio 1.2720218787763 times the ratio 1.2720218787763 = the ratio 1.6180396600856.

      Proof that the Kepler right triangle is the key to the true value of Pi can also be demonstrated if the length of the measuring tape is a minimum of 4 meters = 4000 millimeters, because if the circumference of the 1-meter diameter circle = 3144.6 millimeters is marked and placed on a horizontal straight line while the 1-meter diameter of the circle = 1000 millimeters is multiplied 4 equal times on a vertical straight line the result is the circumference of the 1-meter diameter circle = 3144.6 millimeters is the shortest edge length of a Kepler right triangle while the multiplication of the 1-meter diameter of the circle = 1000 millimeters = 4000 millimeters is the second longest edge length of a Kepler right triangle.

      The multiplication of the 1-meter diameter of the circle = 1000 millimeters by 4 equal parts is 4000 millimeters. 4000 divided by 3144.6 = the ratio 1.2720218787763.

      The ratio 1.2720218787763 is an approximation of the square root of the golden ratio of √φ = 1.272019649514069, because the ratio 1.2720218787763 squared meaning that the ratio 1.2720218787763 times the ratio 1.2720218787763 = the ratio 1.6180396600856.


      The ratio 1.6180396600856 is an approximation of the golden ratio of the square root of 5 plus 1 divided by 2 = (φ) = 1.61803398874895. It is evident that the infinite decimal expansion for the correct value of pi can be derived from the formula 4 divided by the square root of the golden ratio = 4/√φ = 3.144605511029693144..

      Apply the Pythagorean theorem to the 2 right angles that are created from the results of the diameter of the circle being multiplied 4 equal times upon a vertical straight line while the circumference of the circle is placed upon a horizontal straight line, to get the hypotenuse of a Kepler right triangle.

      A wooden circle with a diameter of 1-meter has also been measured and used to confirm that the correct value of pi is 4/√φ = 3.1446. Below are videos involving the measurement of circles with a diameter of 1-meter to prove that the correct value of pi = 4/√φ = 3.144605511029693144:

      I must repeat: any ratio that is not the result of a circle's circumference divided by a circle's diameter is not Pi.

      Introduction to the true value of Pi = 4/√φ = 3.144605511029693144 – Pi intro video brand:

      https://m.youtube.com/watch?v=1DawMQ1LV6Q&list=LL&index=63

      Proof 7 Part 1 Pi Circumf Measurement:

      https://m.youtube.com/watch?v=fATlIzht7VI&list=LL&index=53

      Pi tape foam board circle 1:

      https://m.youtube.com/watch?v=KFGww0z6HRw&list=LL&index=50

      Pi Tape Measurement Foam Board Circle 2:

      https://m.youtube.com/watch?v=KTJsCzHLsEo&list=LL&index=49

      Pi Tape Measurement Foam Board Circle 3:

      https://m.youtube.com/watch?v=ehjANdRlktw&list=LL&index=48

      Pi tape measurement Hardwood :

      https://m.youtube.com/watch?v=DSAK6XcdVuI&list=LL&index=51

      Pi video Math brand:

      https://m.youtube.com/watch?v=nvja8rGCbzY&list=LL&index=60

      Geo Proof 1 Brand:

      https://m.youtube.com/watch?v=FBKl62-13SQ&list=LL&index=58

      Geo Proof 2 Brand:

      https://m.youtube.com/watch?v=E1KUSEfr46k&list=LL&index=57

      Geo Proof 4 Brand:

      https://m.youtube.com/watch?v=d22iTENHGwU&list=LL&index=56

      Geo Proof 6 Brand:

      https://m.youtube.com/watch?v=VVwJ4J4pUFQ&list=LL&index=55

      5 More Constants Brand:

      https://m.youtube.com/watch?v=BYlEvYflOps&list=LL&index=54

      Fixing and Correcting the problems caused by using Traditional Π = Pi

      https://www.youtube.com/watch?v=X1ZAtn6g-Vg

      Harry Lear Interview Apophis & Pi:

      https://m.youtube.com/watch?v=QKYxk_epDzQ&list=LL&index=29

      www.measuringpisquaringphi.com

      PYTHAGOREAN THEOREM:

      https://en.wikipedia.org/wiki/Pythagorean_theorem

      Golden ratio:

      https://en.wikipedia.org/wiki/Golden_ratio

      Back to basics: How to measure a circle article about Pi:

      https://www.thunderbolts.info/forum3/phpBB3/viewtopic.php?f=11&t=341

      Traditional Π = Pi = (51066975/16255123) = 3.141592653589793 is false.

      Traditional Π = Pi = (10 ^ 12)/(16255123/10213395)/(2)/(10 ^ 11) = 3.141592653589793 is false and is also the result of the perimeter of a regular polygon with more than a trillion edges divided by the diagonal of the polygon that has a perimeter with more than a trillion edges.

      Perimeter of the regular polygon = 1000,000,000,000,000,000,000,000,000,000,000,000,000,000.
      That is 1 Plus 42 zeros.

      Commas removed = 1000000000000000000000000000000000000000000.
      Diagonal of a regular polygon with 1000,000,000,000,000,000,000,000,000,000,000,000,000,000 edges = the ratio 3.183098861837902e + 82.

      1000,000,000,000,000,000,000,000,000,000,000,000,000,000
      divided by 3.183098861837902e + 82 =
      3.14159265358979769496178102.

      (10 ^ 42)/(3.183098861837902) = 3.141592653589793.

      ((10 ^ 42)/(30685681/9640191)) = 3.141592653589793.

      Traditional Π = Pi = with 24 decimal places = 3.141,592,653,5897,976,949,617,8102

      Traditional Π = Pi = with 15 decimal places = 3.141,592,653,589,793.

      Regular Polygon calculator. Please remember to use a minimum of 15 digits to be accurate:

      http://www.1728.org/polygon.htm

      Regarding the chords and arcs of circles:

      A chord is a straight line. The edge of a polygon is a chord.
      An arc is a curve. The total arc length of a circle is the full curvature around the circle.

      If an arc is attached to a chord in a circle then the length of the arc is longer than the length of the chord.

      It is known that the curvature of a circle is longer than the chord length for the perimeter of a polygon that is contained inside of the circle and this knowledge makes it evident that the numerical value for the perimeter of a polygon is always the same as the numerical value for the division of the curvature of the circle that contains the polygon.

      If the circumference of a circle is divided into 3 equal parts then the circumference of the circle will contain both 3 chords and 3 arcs and the length of 1 of the arcs will be longer than 1 of the 3 chords that make up the circumference of the circle.

      If the circumference of a circle is divided into 8 equal parts then the circumference of the circle will contain both 8 chords and 8 arcs and the length of 1 of the arcs will be longer than 1 of the 8 chords that make up the circumference of the circle.

      If the circumference of a circle is divided into 12 equal parts then the circumference of the circle will contain both 12 chords and 12 arcs and the length of 1 of the arcs will be longer than 1 of the 12 chords that make up the circumference of the circle.

      The curvature of the circle when divided into equal divisions has the same numerical value as the perimeter of a polygon that is contained inside of the circle.

      If a polygon is inscribed inside of a circle then the diagonal of the polygon and the diameter of the circle will have the same measure but the total curvature around the circle will be longer in measure than the perimeter of the polygon that is contained inside of the circle.

      The correct definition for pi is the ratio for the circumference of a circle divided by the diameter of a circle.

      Traditional Π = Pi = 4 divided by the square root of = 1.621138938277405 = 3.141592653589793 is false and does not come from the ratio for the circumference of a circle divided by the diameter of a circle.

      Traditional Π = Pi = (4/√(48908982/30169519)) = 3.141592653589793 is false.

      The correct value for pi cannot be derived from dividing the perimeter of a polygon with a trillion edges by the diagonal of the polygon with a trillion edges.

      The measure for the curvature of a circle divided by the diameter of the circle produces the correct value for pi = 4 divided by the square root of the golden ratio = 4/√φ = 3.144605511029693144.

      To discover the value for the curvature of a circle divided by the diameter of a circle a circle with a 1 meter diameter should be created and the number of times the 1 meter –diameter can be multiplied around the curvature of the circle must be measured and recorded to confirm the correct value of pi.

      The measure for the curvature of the circle with a 1-meter diameter must be divided by the 1-meter diameter to confirm the correct value for pi.

      Measurements from multiplying a 1-meter diameter for a circle around the curvature of a circle has already been recorded and the correct value for pi have been confirmed to be 3.1446 and not 3.141.

      To get the rest of the digits for the true value of pi = 3.1446 a kepler right triangle can be used to create a square that has a perimeter that is equal in measure to the curvature of a circle.

      If the second longest edge length for a Kepler right triangle is used as the diameter for a circle then the perimeter of the square that is located upon the shortest edge length for the Kepler right triangle can be confirmed to be the same measure as the curvature of the circle that has a diameter equal in measure to the second longest edge length for the Kepler right triangle.

      When the perimeter of the square that is located on the shortest edge length for the Kepler right triangle is divided by the diameter of the circle that is equal in measure to the second longest edge length for the Kepler right triangle the correct value for pi = 4/√φ = 3.144605511029693144 is further proven and then the correct value for pi = 4/√φ = 3.144605511029693144 is multiplied by the diameter of the circle that is equal in measure to the second longest edge length for the Kepler right triangle the result is that the curvature of the circle is confirmed to be the same measure as perimeter of the square that is located on the shortest edge length for the Kepler.

      The arc length of the circle is the same measure as the perimeter of the square because the square root of the golden ratio = √φ = 1.2720196495141 can allow the curvature of a circle to be placed on a straight line by using just compass and straight edge.

      The Square root of the Golden ratio can be used to transfer the total curvature of a circle to a straight line. The Square root of the Golden ratio = √φ = 1.2720196495141 can turn curves into straight lines and straight lines back into curves.

      The square root of the golden ratio = √φ = 1.2720196495141 can be used to transform curves into straight lines and straight lines into curves.

      The claim that the perimeter of the square is the same measure as the arc length of the circle due to the measure of the arc length of the circle being derived with the use of the square root of the golden ratio = √φ = 1.272019649514069 can be confirmed if a circle with a 1-meter diameter is created and the diameter of the circle is multiplied around the curvature of the circle confirming that the correct value for pi must be 3.1446.

      The Kepler right triangle also confirms that ratio for a circle’s circumference divided by a circle’s diameter is 3.1446.

      THE REAL VALUE OF Pi IS NOT TRANSCENDENTAL BECAUSE THE REAL VALUE OF PI = 4/√φ = 3.144605511029693144 IS THE ONLY VALUE OF PI THAT CAN FIT THE FOLLOWING POLYNOMIAL EQUATION:

      4th dimensional equation/polynomial for Golden Pi = 4/√φ = 3.144605511029693

      Minimal polynomial:

      x4 + 16x2 – 256 = 0.

      Chord (geometry):
      https://en.wikipedia.org/wiki/Chord_(geometry)